648710
13
Zoom out
Zoom in
Previous page
1/22
Next page
appropriate mains socket. Always use the product with the
cable completely unwound.
1.9 The appliance is ready for use.
2. CONNECTION OF ACCESSORIES (see page 4)
All the Vaporetto Lecoaspira accessories can be connected
directly to the flexible steam/vacuum hose or to the extension
hoses.
2.1 To connect the specific accessories for the suction and
steaming features proceed as follows:
Move the locknut of the accessory, if
present, to the OPEN position and connect
the accessories.
Move the accessory locknut to the CLOSED
position. Check the strength of the
connection.
On the extension tubes there is an
additional fastening button: proceed as
described previously for the accessories
and release the tubes by sliding the button
as far as the lock position.
2.2 To connect the special accessories only for suction it is only
necessary to attach them without coupling them to the locknut.
2.3 To connect the steam lance with the steam concentrator,
simply screw it on. The same operation can be carried out for
the coloured brushes, which can in turn be screwed onto the
steam concentrator and onto the steam lance. The different
colours allow you to always use the same brush for the same
surface.
3. CLEANING HARD FLOORS
(tiles, ceramic surfaces, etc.)
Make sure that you have prepared the appliance following the
instructions listed in Chapter 1 and connect the accessories
listed in Chapter 2.
3.1 Lock the two extension tubes (3) onto the handle (1).
3.2 For suction only, connect the universal brush (2) with the
bristle frame (2a) and press the suction button on the appliance
to proceed with the cleaning operations.
3.3 For steam cleaning and suction attach the frame for liquids
(2b) to the universal brush (2).
3.4 (see page 5) Turn on the boiler by pressing the boiler button
and adjust the strength of the steam using the steam adjustment
dial (to turn the boiler off press the boiler button again); for this
type of surface we recommend steam level 4/5. The steam
indicator light ( ) comes on, and then turns off when the correct
temperature has been reached.
3.5 Deactivate the steam lock and continue with the steam
delivery and suction, pressing the steam trigger on the handle,
and the suction button on the appliance.
The combined use of steam and suction allows the most
efficient sanitising of the surface, dissolving dirt, eliminating
grease, germs and mites, and above all allows drying of the
surfaces.
In this position, it is also possible to vacuum small quantities of
liquids and dry the floor.
3.6 To clean using steam alone, it is possible to use the abrasive
action of the cloth supplied (10). Attach it to the universal brush
(2) (see page 5) before starting to clean the surface.
4. CLEANING DELICATE FLOORS
(wooden, stone, waxed surfaces, etc.)
Make sure that you have prepared the appliance following the
instructions listed in Chapter 1 and connect the accessories
listed in Chapter 2.
4.1 Lock the two extension tubes (3) onto the handle (1).
4.2 For suction only, connect the universal brush (2) with the
bristle frame (2a) (see page 4) and press the suction button on
the appliance to proceed with the cleaning operations.
4.3 For steam cleaning and suction attach the rug/carpet frame
(2c) to the universal brush (2) (see page 4). Attach the cloth
supplied (10) to the universal brush (2) (see page 5).
4.4 (see page 5) Turn on the boiler by pressing the boiler button
and adjust the strength of the steam using the steam adjustment
dial (to turn the boiler off press the boiler button again); for this
type of surface we recommend steam level 1/2. The steam
indicator light ( ) comes on, and then turns off when the correct
temperature has been reached.
For safety reasons, engage the steam lock on the handle
during vacuuming.
Before using the appliance on delicate surfaces, ensure that
the part in contact with the surface is free from foreign bodies
that could cause scratches.
Before removing the cloth from the brush, wait a few minutes
to allow the cloth to cool.
For safety reasons, engage the steam lock on the handle
during vacuuming.
To avoid any dirt in the dirt collector causing bad smells, we
recommend emptying and cleaning after every use according
to the methods described in Chapter 15.
WARNING: When first operating steam, there may be some
drops of water mixed with the steam due to temperature
imbalances.
Direct the first jet of steam onto a rag.
| 29|
ENGLISH
PRELIMINARE LECOASPIRA FAV20_30 - 2015_vers7:UNICO 22/04/2015 10.45 Pagina 29
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polti Vaporetto Lecoaspira FAV30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporetto Lecoaspira FAV30 in the language / languages: English as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti Vaporetto Lecoaspira FAV30

Polti Vaporetto Lecoaspira FAV30 User Manual - German - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info