Manual Polti Vaporetto Lecoaspira 710 (page 9 of 15) (English)

481646

Zoom out

Zoom in

1/15

the suction indicators (5) will start to flash.

• Press the boiler switch (2) which will light

up.

• Wait for the pressure indicator lamp (4) to

light up. When it does, the Vaporetto

Lecoaspira will be ready to generate steam.

• You may now deliver steam by pressing the

steam button (A5) on the handle.

• If you decide not to use the steam anymore,

you may switch off the boiler by pressing

the boiler switch (2).

Thanks to the self-filling function, there is no

longer any need to stop and wait to fill up the

boiler the again.

When the water inside the boiler reaches its

low level, the level probe will automatically

activate a pump that will fill the boiler from

the tank.

When there is no more water left in the self-

filling tank, this will be shown by the “out of

water” switch (3) and you will also be warned

by an audible signal.

In order to continue working, proceed as de-

scribed in the section on "Preparation for

use".

Vaporetto Lecoaspira will enable you to opti-

mise the steam flow by means of the control

knob (8) (Fig. 7). To obtain a higher flow rate

turn the knob in a clockwise direction. When

the knob is turned in an anti-clockwise direc-

tion, the flow rate decreases.

High flow rate of steam:

to remove caked dirt, stains, grease and to

sanitise;

Normal flow rate of steam:

for wall-to-wall and loose carpeting, win-

dows, floors;

Low flow rate of steam:

for spraying plants, cleaning delicate fabrics,

wallpaper.

You will be able to control the force of suc-

tion depending on the type of surface to be

treated. The numbers are those indicated on

the control panel.

1 for curtains

2 for sofas and cushions

3 for carpets

4 for hard flooring and for collecting liquids

Use of the suction controls

Simply by pressing the suction button (A4)

you will be able to start suction.

You will be able to select the speed required

for the type of surface to be treated by keep-

ing the suction button (A4) pressed. When

you increase the suction power, one of the

indicator lamps (5) on the control panel will

light up, and when you lower it one of the

lamps (5) will extinguish.

To turn the appliance off just press the suc-

tion button (A4).

NOTE: when you switch on the suction, the

appliance will restart from the speed it was

at the time of switching off.

Before putting away the Vaporetto

Lecoaspira, store the supply cable (13) in its

compartment (15) proceeding as follows:

• Take out the water container (20) as indi-

cated in the paragraph “preparation for

use”.

• Manually wind the cable evenly and put it

in the storage (15), making it go through

the power supply cable canal (14) (Fig.8).

• Put the water container (20) back in its

place making sure it is correctly posi-

tioned.

The accessories holder (16) allows you to fix

the tube with the brush mounted on it on the

body of the appliance.

To attach the hose to the appliance, slide the

LECOASPIRA710 - 710 KIT

Lecoaspira 710-710kit - M0S07340 1M05.qxp 22/06/2006 12.23 Pagina 57

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporetto Lecoaspira 710 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti Vaporetto Lecoaspira 710

Polti Vaporetto Lecoaspira 710 User Manual - Italian - 15 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Polti Vaporetto Lecoaspira 710 Manual

Product: