Manual Polti Vaporetto Lecoaspira 710 (page 11 of 15) (English)

481646

Zoom out

Zoom in

1/15

moved (Fig. 11a).

Take all the components apart and rinse

them in running water. (If the filter sponge

has any tears, it should be replaced. The fil-

ter can be purchased from an authorised

Polti Assistance centre).

If you wish to continue working, top up the

level of the water.

Put the “EcoActiveFilter” water filter assem-

bly (23) back into the water container (20).

ATTENTION: make the arrow on the elbow

tube (27) coincide with the reference on the

filter body with microholed net (26) (Fig.

11b).

Put the water container (20) back in its place

as described in the “preparation for use”

paragraph.

Note: make sure you empty the water con-

tainer (20) before putting your Vaporetto

Lecoaspira away.

One of the great advantages of Vaporetto

Lecoaspira is precisely the fact that it is pos-

sible to put it away clean.

Before treating leather, special fabrics (es-

pecially dralon and velvet) or wooden sur-

faces with steam, consult the manufacturer’s

instructions and always proceed only after

carrying out a test on a hidden part or a sam-

ple. Allow the area treated with steam to dry

and then check whether any changes in

colour or deformations have occurred before

proceeding further, ensuring exactly the

same steam power and distance as in the

test.

When cleaning wooden surfaces (furniture,

doors, etc.) and brick floors always proceed

with caution since excessive use of steam

could damage the wax, the polish or the

colour of the surface to be cleaned. It is

therefore advisable to apply the steam to

these surfaces only for short periods at a

time or to clean them with a cloth that has

been treated with steam.

On particularly delicate surfaces (e.g. syn-

thetic materials, enamelled surfaces, etc.)

we strongly recommend using the steam at

its lowest output power. When cleaning

glazed surfaces, if the weather is particularly

cold pre-heat the glass working at distance

of about 50 cm away from the surface. To

take care of your plants, we recommend

spraying them from a distance of at least 50

cm.

((

))

It is advisable to use this brush to clean large

surfaces, tiled or marble covered floors, par-

quet, carpets etc., using the following inserts

supplied with it.

• Brush fitting (E2), for use only when vacu-

uming.

• Liquid suction fitting (E3), to pick up liquids;

recommended for smooth surfaces.

• Carpet fitting (E4), suitable for fitted and

loose carpets.

The multi-purpose brush can be connected di-

rectly to the pistol, or to the hose by means of

the extension tubes (D).

ASSEMBLING THE FITTINGS:

To separate fittings from the brush, push the

two slides (E1) outwards and remove the fit-

ting. To fix the fitting to the brush again, simply

press it into its seat (fig.C).

°°

((

))

We suggest to use this accessory to clean

areas that are difficult to reach with the other

accessories. The 120° accessory may be

used for:

• treating stains on carpeting or loose car-

pets, before going over them with the

brush;

• cleaning stainless steel, windows, mirrors,

layered coating and paintwork;

• cleaning corners such as stairs, windows

frames, door jambs, aluminium sections;

• cleaning the bases of taps;

• cleaning blinds, radiators, the interiors of

cars;

• atomising house plants from a distance.

The 120° accessory can also be fitted di-

rectly onto the handle (A2) or it can be con-

LECOASPIRA710 - 710 KIT

Lecoaspira 710-710kit - M0S07340 1M05.qxp 22/06/2006 12.23 Pagina 59

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporetto Lecoaspira 710 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti Vaporetto Lecoaspira 710

Polti Vaporetto Lecoaspira 710 User Manual - Italian - 15 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Polti Vaporetto Lecoaspira 710 Manual

Product: