Manual Polti MONDIAL VAP 2000 (page 6 of 12) (English)

648834

Zoom out

Zoom in

1/12

ENGLISH

Before leaving our factory all our products are rigorously tested. For this

reason your Mondial vap 2000 contains a small quantity of water and on first use

we recommend that you do not add further water until all existing water in the

tank has been exhausted and allowed to escape as steam.

1. Unscrew the patented safety cap (A) and fill the

generator with 3 litres of normal tap water, using the

special anti-drop filler bottle (14) (Fig. 1).

2. Carefully screw on the safety cap to hand tight (Fig. 2).

3. Connect the power supply cable (F) into an earthed

power supply of the correct voltage (230V - 240V).

1a. Press down the generator on/off switch (B) and the

accessories on/off switch (C) wich will light up together

with the pressure indicator light (K).

2a. Open the cover of the central connector block (D) and

insert the central connector (4) pressing the connector but-

ton (5) and taking care that the locking tab (6) is correct-

ly positioned in the lock-in aperture (E) on the block (Fig 3).

3a. Wait for the pressure warning light (K) (where available)

to go out. (Note: on some models where there is no

separate pressure indicator light, instead wait for the

light inside the generator on/off switch (B) to go out).

MONDIAL VAP 2000 is now ready for use.

Fig. 1

Fig. 2

Fig. 3

Is it possible for the safety cap to sieze up if the machine hasn't been used for a while. Submitted on 18-1-2022 at 16:46
Reply Report abuse
If my polti 2000 has not been in use for the last 5 years but has been stored correctly, is it possible for the safety cap to become seized up I have tried to open it using the the correct procedure but to no avail. Submitted on 18-1-2022 at 16:33
Reply Report abuse
qdo a tampa de proteção não retorna ao sistema original (gira livre) o que fazer ? Submitted on 18-7-2020 at 13:47
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Polti MONDIAL VAP 2000 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Polti MONDIAL VAP 2000 Manual

Product: