542823
14
Zoom out
Zoom in
Previous page
1/22
Next page
27
26
Besides each alternative you can see the amount of memory left
when using that particular choice of recording interval.
The selected recording interval defaults for the next measurement
period.
For more information of R-R-recording see Polar Glossary; R-R-
recording.
Recalling the training information
LEFT and FILES scan on the display.
1. Press STORE/LAP/RECOVERY to be able to select the file you
want to recall.
The front page of the last recorded file including file number,
time and date is shown on the display. On the bottom line you
can see the maximum (MAX), average (AVG) and minimum
(MIN) heart rate of the training session scanning and the total
number of LAPs.
2. Press SIGNAL/LIGHT if you like to see the front page of the previous
file.
To get back to the beginning of recalling the training information,
press SELECT.
3. Once you have the front page of the desired file on the display,
press STORE/LAP/RECOVERY to recall the contents of the file.
The following figures will appear on the display one
after another as you press the STORE/LAP/RECOVERY button:
LIM 1 Settings for Target Zone 1
LIM 2 Settings for Target Zone 2
TH Setting for Threshold values
LIM 1 TZ Exercising time above the Target Zone 1
LIM 1 TZ Exercising time within the Target Zone 1
LIM 1 TZ Exercising time below the Target Zone 1
LIM 2 TZ Exercising time above the Target Zone 2
LIM 2 TZ Exercising time within the Target Zone 2
LIM 2 TZ Exercising time below the Target Zone 2
TH TZ Exercising time above the Upper threshold
TH TZ Exercising time between the thresholds
TH TZ Exercising time below the Lower threshold
4. Press again STORE/LAP/RECOVERY to continue reviewing the
following file information:
Recorded heart rate readings
Lap/Split times scanning with corresponding Recovery
Heart Rates / Recovery Times
Swappings between Heart Rate Limits 1 and 2
When reviewing these details, the digits will run faster if you press and
hold the STORE/LAP/RECOVERY button. Release the button when
you want to see a certain reading for a longer time. The button is
released automatically in case a split/lap time or change of Heart Rate
Limits is showing up on the display.
To view the file backwards, press SIGNAL/LIGHT instead of STORE/
LAP/RECOVERY.
5. Finally you will see the end of the file.
“End” at the end of each file
Total exercising time with last lap and heart rate
6. Press SELECT to stop reviewing the files.
LEFT and FILES start flashing.
7. Press SELECT twice to return to the time of day display.
Deleting the most recent file
LEFT and FILES scan on the display.
1. To delete the most recent file, press SET/START/STOP.
DEL FILE with the number of the most recently recorded file
appears on the display.
2. Confirm the deleting of the file by pressing STORE/LAP/
RECOVERY.
The most recent file is deleted.
If you decide not to delete the most recent file, press SELECT.
Press SELECT twice to return to the time of day display.
scan
scan
scan
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar VANTAGE NV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar VANTAGE NV in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info