542823
11
Zoom out
Zoom in
Previous page
1/22
Next page
21
20
HOW TO START THE HEART RATE
MEASUREMENT
CHOOSE FROM THESE ALTERNATIVES:
Quick start
1. Wear the Transmitter and the Receiver as described earlier.
2. In the Time of Day mode, press STORE/LAP/RECOVERY.
Heart Rate Measurement starts.
The search for transmission code starts.
The heart rate reading appears on the bottom line in
a few seconds.
Stopwatch starts running.
Automatic recording of heart rate information starts.
Two touch start
1. Wear the Transmitter and the Receiver as described earlier.
2. In the Time of Day mode, press SELECT.
Heart Rate Measurement starts.
The search for transmission code starts.
The heart rate reading appears on the bottom line in a few
seconds.
3. Start the stopwatch by pressing SET/START/STOP.
Stopwatch starts running.
Automatic recording of heart rate information starts.
You will see immediately how many percent of the memory is left with
the default settings.
For example if all the memory is available, you’ll see MEM with
99 and % scanning in the lower right corner of the display.
HOW YOUR POLAR VANTAGE NV
AUTOMATICALLY SETS THE
TRANSMISSION CODE
The transmission code will be selected automatically by your Polar
Coded Transmitter in the beginning of each training session. Once
you have started the heart rate measurement as described earlier, the
following will happen:
1. The Wrist Receiver starts searching for your coded transmission
within 70 cms.
- - appears in the bottom of the display indicating that the
Receiver is searching for a code.
2. Make sure that the code search is successful:
During the code search (max. 30 seconds) keep the Wrist Receiver
near to your Polar Coded Transmitter, which you are wearing.
Also check that there are no disturbances near you during the code
search (for example other people with heart rate monitors, high
voltage power lines, televisions, cars, exercise equipment, etc.)
3. If the code search was successful, you’ll notice borders around the
heart symbol during measurement in the lower left
corner of the display. You can now start exercising normally.
4. If the code search was not successful (no borders around the heart
symbol), the Wrist Receiver treats Polar Coded Transmitter as a
regular Polar Transmitter. You can either start exercising normally
with uncoded transmission or check your environment, keep your
Wrist Receiver nearer to the Polar Coded Transmitter and restart the
heart rate measurement and code search.
5. The benefit of the coding is that you will not normally pick up other
people’s heart rate transmission and certain kinds of disturbances
are more efficiently filtered. How ever your training partner may
coincidentally have exactly the same transmission code. To check
your code number, bring the Polar Vantage NV Receiver next to the
Polar-logo of your Polar Coded Transmitter. The code in use and TC
start scanning in the lower right corner of the display. If you have the
same code number with your training partner you have the
following alternatives:
1. Keep distance to your training partner and continue your
training session normally
or
2. Stop the heart rate measurement and enter back to Time
mode. Pull the transmitter off your chest for 15 seconds
(code will be changed) and restart the heart rate measurement.
In some cases you may need to dry the transmitter electrodes
to ensure that the transmitter is turned off and on again, as the
sweat may keep it active even when it is off the chest.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar VANTAGE NV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar VANTAGE NV in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info