542823
7
Zoom out
Zoom in
Previous page
1/22
Next page
13
12
HOW TO SET THE HRM
FUNCTIONS
In the SET-mode you can set the following ten different HRM functions
in your Polar Vantage NV HRM:
- Timer 1
- Timer 2
- Heart Rate Limits 1
- Heart Rate Limits 2
- Training thresholds
- Recovery Heart Rate / Recovery Time
- Heart Rate Reception Distance
- Time Display
- Relaxation / Lap Display
- Memory deletion
Each of these functions is represented by a block in the graphic bar
in the above order. A flashing block means that you are setting the
corresponding function.
Start here to set any of these functions:
1. In the Time of Day display press the SELECT-button three times.
SET starts to flash in the upper right corner of the display.
The uppermost block of the graphic bar on the right, repre-
senting the setting of
Timer 1
, starts to flash.
2. Go through the settings step by step for each of these functions by
following the instructions.
You can also go directly to set any particular function. If you prefer this,
press SET /START/STOP shortly as many times as needed until you
see the corresponding symbol of the desired function in the display
and the block flashing. Now follow the instructions for setting that
particular function.
Setting the Timers 1 and 2
The first two digits, representing the minutes of
Timer 1, flash.
If you don’t want to use the timer, set the value to
zero.
1. Press SIGNAL/LIGHT to select the desired
minutes.
The digits will run faster if you press and hold the
SIGNAL/LIGHT button. Release the button when the
desired value is approaching.
2. Press STORE/LAP/RECOVERY to lock your
selection.
The last two digits, representing the seconds of the Timer, start
to flash.
3. Press SIGNAL/LIGHT to select the desired seconds.
4. Press STORE/LAP/RECOVERY to lock your selection.
5. Press SET/START/STOP to enter the setting mode of Timer 2.
The second block of the graphic bar on the right, representing
the setting of
Timer 2
, starts to flash.
The first two digits, representing the minutes of the Timer 2, start
to flash.
6.Repeat the steps from 1 to 4 to set the Timer 2.
You can set the Timer 2 only if the Timer 1 has been set.
If you want to set only the Timer 1, set the value for Timer 2 in zero.
Timers start running when you start the stopwatch. Timer 2 will follow
Timer 1 and they will alternate accordingly when the stopwatch is
running.
7. Press SET/START/STOP to set the Heart Rate Limits.
The third block of the graphic bar on the right, representing the
setting of the
Heart Rate Limits 1
, starts to flash.
The upper reading, representing the Upper Limit 1, starts to
flash.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar VANTAGE NV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar VANTAGE NV in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info