542823
5
Zoom out
Zoom in
Previous page
1/22
Next page
9
8
HOW TO SET THE WATCH
In the Time of Day display you can set the following three watch
functions:
- Alarm
- Time
- Date
Each function is represented by a block in the graphic bar in the above
order. A flashing block means that you are setting the corresponding
function.
Setting the 12/24h display
1. In the Time of Day display, press and hold SET/
START/STOP. Release.
12 h mode with AM/PM indicator is
activated.
2. Press and hold again. Release.
24 h mode is activated.
3. The chosen mode is now used in all watch and
alarm functions.
If you chose the 24 h mode you can skip those parts in
the following instructions, which advise you to set AM or
PM.
Start here for the setting of alarm, time and/or date:
1. In the Time of Day display press the SET/START/STOP-
button.
SET starts to flash in the upper right corner of the display.
• ALM appears on the display.
Alarm symbol starts to flash.
The uppermost block of the graphic bar on the right, represent-
ing the setting of Alarm, starts to flash.
2. Go through the setting of alarm, time and date step by step by
following the instructions.
You can also go directly to set just one particular function by pressing
SET/START/STOP shortly as many times as needed until you see the
corresponding symbol of the desired function in the display and the
block flashing. Now follow the instructions for setting that particular
function.
Setting the alarm
Alarm Symbol is flashing.
1. Press SIGNAL/LIGHT to set the alarm on
(
appears) or alarm off ( disappears).
2. Press STORE/LAP/RECOVERY to lock your
selection.
AM starts flashing.
3. Press SIGNAL/LIGHT to select AM or PM.
4. Press STORE/LAP/RECOVERY to lock your
selection.
The first two digits, representing the hours, start
flashing.
5. Press SIGNAL/LIGHT to select the desired hour.
The digits run faster if you press and hold the SIGNAL/LIGHT button.
Release the button when the desired value is approaching.
6. Press STORE/LAP/RECOVERY to lock your selection.
The last two digits, representing the minutes, start flashing.
7. Press SIGNAL/LIGHT to select the desired minutes.
8. Press STORE/LAP/RECOVERY to lock your selection.
9. Press SET/START/STOP to enter the time setting mode.
AM starts flashing.
10. Now continue from Setting the time.
To return immediately to Time of Day display, press the SELECT button
twice.
When the alarm comes on it will sound for one minute or you can turn
it off by pressing STORE/LAP/RECOVERY button.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar VANTAGE NV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar VANTAGE NV in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info