542820
10
Zoom out
Zoom in
Previous page
1/29
Next page
1918
If there is a bike symbol in the lower right corner of the display,
the most recent exercise was done in the Cycling mode. To switch to
the heart rate mode press SET/START/STOP and SIGNAL/LIGHT
simultaneously .
2. SEE YOUR HEART RATE
You can see your heart rate in the bottom line of the display.
The target zone information is displayed as follows:
You are exercising within the preset Target Zone.
You are exercising above the preset Target Zone.
You are exercising below the preset Target Zone.
Exercising within, above and below the Target Zone is indicated only when
the stopwatch is running.
3. TURN THE TARGET ZONE SOUND SIGNAL OFF/ON
Press and hold SIGNAL/LIGHT for 1 second to toggle between ON/OFF.
4. STOP/START THE STOPWATCH
Press SET/START/STOP to stop/start the stopwatch.
Average heart rate, maximum heart rate and time below, within and above
the Target Zone are calculated only when the stopwatch is running.
5. ILLUMINATE THE DISPLAY
Press SIGNAL/LIGHT.
6. CHECK THE SECONDARY MEASUREMENT DISPLAYS
The secondary measurement displays will be seen for a few seconds by
bringing the wrist receiver next to the Polar logo of the Polar
Coded Transmitter for a moment (wireless button).
FUNCTIONS DURING
HEART RATE MEASUREMENT
1. START THE HEART RATE MEASUREMENT
1. Wear the transmitter and receiver as described in Getting going.
2. Check that there are no disturbances near you as you are about to start
the code search for coded transmission.
Make sure that the code search will be successful:
• Keep the receiver within 3 feet/1 metre from your Polar Coded
Transmitter, which you are wearing.
• Check that you are not near to other people with heart rate
monitors, high voltage power lines, televisions, mobile phones, cars,
exercise equipment etc.
3. Start the code search in the Time of day display by pressing SELECT.
The receiver starts searching for coded transmission for max.
20 seconds.
The coded heart rate information appears in the bottom line of
the display.
If the code search was not successful, 00 appears in the display. Restart
the measurement from the Time of day display and follow the above
mentioned precautions during the code search.
Polar Protrainer XT is compatible only with Polar Coded Transmitter.
4. Start the stopwatch by pressing SET/START/STOP.
Stopwatch starts running and you hear a long beep.
Display is illuminated for a few seconds.
5. You can now start exercising with your heart rate monitor.
Quick start
for heart rate measurement from the display showing
Time of day: wear the transmitter and receiver as described in
Getting going and press and hold STORE/LAP/RECOVERY. Release.
PROXT GBR/E 7.2.2001, 09:0018-19
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar PROTRAINER XT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar PROTRAINER XT in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info