542820
8
Zoom out
Zoom in
Previous page
1/29
Next page
1514
SETTING THE HEART RATE LIMITS 1, 2 & 3
Heart rate limits
Heart rate limits can be set in one beat per
minute increment which allows you to monitor
your workouts securing the correct exercise
intensity.
LIM 1 is displayed.
The upper reading representing the upper
limit 1 is flashing.
If you pass the digit you wanted to set by
accident, press and hold SET/START/STOP to
restart from the default settings (80-160).
1. Press SIGNAL/LIGHT to select the desired value for the upper limit 1.
You cannot set the upper limit below the lower limit. The range for
the target heart rate zone is 10 - 240.
2. Press STORE/LAP/RECOVERY to lock your selection.
The lower reading, representing the lower limit 1, starts flashing.
3. Press SIGNAL/LIGHT to select the desired lower limit 1.
4. Press STORE/LAP/RECOVERY to lock your selection.
The upper reading starts flashing.
5. Press SET/START/STOP to start setting the heart rate limits 2.
LIM 2 is displayed.
The upper reading representing the upper limit 2 start flashing.
6. Repeat the steps 1 to 4 to set the heart rate limits 2.
7. Press SET/START/STOP to start setting the heart rate limits 3
The upper reading representing the upper limit 3 starts to flash.
8. Repeat the steps 1 to 4 to set the heart rate limits 3.
If you want to use only the Limits 1, set the value for Limits 2 and
Limits 3 to zero.
SETTING THE TIMERS 1 & 2
Timers
This function helps you to divide your exercise
session into separate phases (e.g. warm-up,
exercise phase, cool down). Timers can be
used individually or sequentially.
The minutes of Timer 1 are flashing.
If you don’t want to use the timers, set the
values for Timer 1 to zero. If you want to
use only the Timer 1, set the value for
Timer 2 to zero.
If you pass the digit you wanted to set by accident, press and hold
SET/START/STOP to restart from 00.
1. Press SIGNAL/LIGHT to select the desired minutes.
2. Press STORE/LAP/RECOVERY to lock your selection.
The seconds of the Timer 1 start flashing.
3. Press SIGNAL/LIGHT to select the desired seconds.
4. Press STORE/LAP/RECOVERY to lock your selection.
5. Press SET/START/STOP to start setting of Timer 2.
The minutes of Timer 2 are flashing.
6. Repeat the steps from 1 to 4 to set the Timer 2.
Timer 1 starts running when you start the stopwatch. You will hear one
beep when the time of Timer 1 is up. Timer 2 will start automatically
after the beep. You will hear two beeps when the time of Timer 2 is
up. If you set only Timer 1, it will not repeat itself after its time is up.
You have the following two alternatives to continue:
1. To start setting the Heart rate limits 1, 2 & 3 press SET/START/STOP.
The second block of the graphic bar representing the setting of
the Heart rate limits is flashing.
LIM1 is displayed.
The reading representing the Upper Limit 1 is flashing.
Continue from Setting the Heart rate limits 1, 2 & 3.
2. To return to the Time of day display press SELECT twice.
PROXT GBR/E 7.2.2001, 09:0014-15
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar PROTRAINER XT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar PROTRAINER XT in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info