542777
37
Zoom out
Zoom in
Previous page
1/59
Next page
37
1. Open the reception tool. Go to System Settings.
2. Click the arrow in the main base station's information box.
3. Click Remove. All base stations are removed from the system.
4. Reset the old base stations in the system. See more details in Resetting base station.
5. Set up the base stations normally. See more details in Setting up base stations.
6. After setting up the base stations, synchronize the connectors with the new base station com-
bination. See more details in Synchronizing connectors with new base stations.
If the the main base station is replaced in the Cardio GX system, all the base stations in the system must
be set up again.
TEACHING CONNECTORS
Before you can use transmitters for online monitoring, the connectors must be introduced to the system. It
takes only a few minutes, and it has to be done only once for every connector. You can teach up to 80 con-
nectors to the system.
1. Open the reception tool. Go to System Settings.
2. Make sure the base stations are set up. The base stations should be available in System Settings.
3. Connect the main base station to the PC or to the router with a network cable provided in the set.
4.
Switch on the main base station. Wait until and are lit on the main base station. It takes
approximately 1 minute.
5. Plug the power cable into the charger and insert the (new) connectors into the charger.
6.
Wait until is lit on the main base station. New connectors appear into the New box.
7. Select a connector under New. Wait until the software assigns a number for the connector. It may take
up to 15 seconds.
8. Pick up corresponding number sticker and remove the connector with a continuously lit green light from
the charger.
9. Click OK and attach the sticker onto the connector. The connector moves into the connectors box.
10. Repeat steps 5/7 to 9 until you have taught all the connectors to the system.
If you re-insert the taught connectors into the charger, their battery status is shown in the connectors box.
See also Removing connectors from the system.
REMOVING CONNECTORS FROM THE SYSTEM
After removing a connector from the system, you can re-teach the connector at any time.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar CARDIO GX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar CARDIO GX in the language / languages: English as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polar CARDIO GX

Polar CARDIO GX User Manual - German - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info