542777
36
Zoom out
Zoom in
Previous page
1/59
Next page
36
Based on your needs, the secondary base stations can be connected to the system either wirelessly or with
an Ethernet cable. The main base station is always connected to the system with an Ethernet cable. The com-
puter or computers are also connected to the system with an Ethernet cable.
SETTING UP SECONDARY BASE STATIONS
In order to use more than 28 connectors simultaneously, secondary base stations must be set up to the Car-
dio GX system. Additional base stations can be purchased as accessories. Follow the steps below if you did
not set up secondary base stations during the system settings wizard.
1. Open the reception tool. Go to System Settings.
2. Make sure the main base station is set up. The main base station should be available in System Set-
tings. If you want to change the main base station's settings (name or wireless network key), do it
before setting up the secondary base stations.
3. Switch off the main base station and the possible secondary base station. Keep the reception tool
running and the System Settings section open.
4. Click Add secondary base station.
5. Connect a secondary base station to the computer or to the router with the cross-over Ethernet cable
provided in the set.
6. Switch on the secondary base station. Wait until the software detects the new base station. It may
take up to 1 minute.
7. Click OK to add the secondary base station to the Cardio GX system.
8. Switch off the secondary base station and unplug the Ethernet cable. If you want to set up another
secondary base station, repeat steps 3-7.
To utilize secondary base stations, the main base station must be on and connected to the computer or to the
router. Depending on your Cardio GX system setup, the secondary base stations connect to the CardioGX
system either with an Ethernet cable through the router or wirelessly through the main base station.
If you are setting up additional base stations after already using the Cardio GX system, you have to syn-
chronize the connectors with the new base station combination. See more details in Synchronizing con-
nectors with new base stations.
If the base station has previously been used with any Tea or Cardio GX system (as a main or sec-
ondary base station), it must be reset before it can be set up to the system (as a main or secondary base sta-
tion) again. See more details in Resetting base station.
REPLACING A MAIN BASE STATION
You can replace the main base station for example if the current main base station is broken. The current main
base station can be replaced with a secondary base station or a new base station.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar CARDIO GX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar CARDIO GX in the language / languages: English as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polar CARDIO GX

Polar CARDIO GX User Manual - German - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info