542810
10
Zoom out
Zoom in
Previous page
1/27
Next page
12 13
SETTING THE HEART
RATE MONITOR
SETTING THE DATE
Date is displayed
differently depending on
which time mode
(12h or 24 h) is chosen.
24 h time mode:
DAY - MONTH - YEAR
12 h time mode:
MONTH - DAY - YEAR
The first digits are flashing.
1. Press SIGNAL/LIGHT to adjust:
The day
if you have chosen
24 h
time mode.
The month
if you have chosen
12 h
time mode.
2. Press STORE/ LAP/RECOVERY to lock your selection.
The middle digits start flashing.
3. Press SIGNAL/LIGHT to adjust the setting.
The month
if you have chosen
24 h
time mode.
The day
if you have chosen
12 h
time mode.
4. Press STORE/LAP/RECOVERY to lock your selection.
The year starts flashing.
5. Press SIGNAL/LIGHT to select the desired year.
6. Press STORE/LAP/RECOVERY to lock your selection.
You have the following two alternatives to continue:
1. To enter the alarm setting mode, press SET/START/STOP.
ALM is displayed.
The alarm symbol is flashing.
Continue from Setting the alarm.
2. To stop the watch settings and to return to the Time of day
display, press SELECT twice.
To see date in the display showing Time of Day, press and
hold SIGNAL/LIGHT. To make the date disappear, press and
hold SIGNAL/LIGHT again.
Start here to set:
- Timers 1, 2 & 3
- Heart Rate Limits 1 & 2
- Recovery function
- Primary / Secondary Time Display
In the display each function is represented by a block in the graphic
bar in the above order. A flashing block means that you are setting
the corresponding function.
Starting the settings
1. In the Time of day display, press SELECT three times.
- SET starts to flash in the upper right corner of the display.
- TIM appears in the display.
- The uppermost block of the graphic bar representing the
setting of Timers 1, 2 & 3 starts to flash.
2. Go through the settings of Timers, Heart Rate Limits, Recovery
function and Primary/Secondary Time Display by following the
instructions.
You can also go directly to set just one particular function by
pressing SET/START/STOP shortly as many times as needed
until you see the corresponding text symbol in the display.
Then follow the instructions for setting that particular function.
The digits run faster if you press and hold the SIGNAL/
LIGHT button. Release the button when the desired value is
approaching. However, if you by accident pass too quickly
the digit you wanted to set, press and hold SET/START/
STOP to restart from default settings.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar ACCUREX PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar ACCUREX PLUS in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info