542810
8
Zoom out
Zoom in
Previous page
1/27
Next page
8 9
SETTING THE WATCH
It is recommended that you wear the transmitter against your
bare skin to ensure flawless operation. However, if you wish
to wear the transmitter over a shirt, moisten the shirt well
under the electrodes.
It is important that the electrodes are wet during the exercise.
However, after exercising, take good care of the transmitter to save
the electrodes and battery life:
1. Wash the transmitter carefully with mild soap water solution.
2. Rinse it with pure water.
3. Dry the transmitter carefully.
To start the heart rate measurement right away with the default
settings* Continue from Start the heart rate
measurement.
Start here to set:
- Alarm
- Time
- Date
In the display each function is represented by a block in the graphic
bar in the above order. A flashing block means that you are setting
the corresponding function.
Set the 12/24 h display
1. In the Time of day display, press and hold SET/START/STOP.
Release.
12 h mode with AM/PM indicator is activated.
2. Press and hold again. Release.
24 h mode is activated.
3. The chosen Time mode is now used in all watch and alarm
functions.
Starting the settings
1. In the Time of day display, press SET/START/STOP.
- SET starts to flash in the upper right corner of the display.
- ALM appears on the display.
- Alarm symbol starts to flash.
- The uppermost block of the graphic bar on the right,
representing the setting of Alarm, starts to flash.
2. Go through setting of alarm, time and/or day step by step by
following the instructions. If you chose the 24 h mode you can
skip those parts in the following instructions, which advise you
to set AM or PM.
You can also go directly to set just one particular function by
pressing SET/START/STOP shortly as many times as needed
until you see the corresponding text symbol in the display.
Then follow the instructions for setting that particular function.
*for default settings see Technical Specifications
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar ACCUREX PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar ACCUREX PLUS in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info