680967
21
Zoom out
Zoom in
Previous page
1/28
Next page
Adam | 21
EN
Adam is connect to a heat pump (Elga)
Adam cannot detect Elga automatically.
Support for the Elga can be activated on
the Adam to make the system work. Please
send an email to support@plugwise.com,
so we can activate this feature. Once
support is turned on, the Elga specic
setting become visible in the web interface
of Adam.
Also check the detected boiler protocol at
Adam, see page 20. This should be
OpenTherm.
In addition it is important that Elga uses
her weather dependent regulation. Elga
must then be connected as described in
scheme K5 or K6 in the Elga installer
manual.
Dip switches on Elga:
» Turn the dip switches B1 & B2 on
» Turn the dip switch A6 on.
» Set the dip switches A1 & A3 to the
house
» Set the dip switch A8 depending on
the communication with the boiler.
Adam is connected to an on/off boiler
Fill in the maximum boiler
temperature that is set on your boiler
at Settings > Heating system > Heating.
Does your boiler use a weather-
dependent regulation? Activate this in
the web interface of Adam and ll in
the maximum boiler temperature as is
set on your boiler for both low and
high outside temperature.
2. Connect to the boiler
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Plugwise Adam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Plugwise Adam in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info