455271

Pioneer VSX-D710S Manual

40
Zoom out
Zoom in
Previous page
1/52
Next page
40
En
Operating other Pioneer
Components
By connecting a control cord (optional), you can control
other Pioneer equipment using the remote control for
this unit. Point the remote control unit towards the
remote sensor of this unit, even when operating other
equipment.
The remote control signals are received by the remote
sensor of this unit, and sent to the other devices via the
CONTROL OUT terminal.
MEMO:
• You can also control Pioneer components by
pointing the receiver's remote control directly at the
component. This type of operation does not require
control cords.
• Whenever making the control jack connections, be
sure to also connect the analog input and output jacks.
System control does not function correctly when only
the digital input and output connections are made.
CONTROL
OUT
OUT
IN
CONTROL
Clearing All the Remote
Control Settings
Clears all presets, all learned functions and restores the
factory presets.
1 Press SETUP and hold for three seconds.
The LED on the remote control lights for two
seconds.
If you want to cancel the CLEARING mode, press
SETUP.
The remote control will also return to the previous
mode after thirty seconds of inactivity.
2 Use the number buttons to enter 0123.
The LED lights for half a second for each digit input.
The LED lights for two seconds to indicate that the
setings have been restored to the factory presets. (If
the LED blinks three times, then you made a mistake
with the code—try re-entering it.)
Direct Function
The direct function is a useful feature which allows you
keep the receiver in one function (for example, CD)
while putting the remote control in a different function.
This could let you, for example, use the remote control
to set up and listen to a CD on the receiver and then use
the remote control to rewind a tape in your VCR while
you continue to listen to your CD player.
When the direct function is on any
MULTI CONTROL
button you press will change the function of both the
receiver and the remote control. When you turn the direct
function off, you can operate the remote control without
affecting the receiver. Thus you could switch the remote
control the VCR and operate that component while the
receiver plays a different component.
To set a MULTI CONTROL button to direct on or direct
off:
1 Press SETUP and hold for three seconds.
The LED on the remote control will light for two
seconds.
The remote control will also return to the previous
mode after thirty seconds of inactivity.
2 Press the MULTI CONTROL button that you
want to set up.
3 Use the number buttons to enter 9990
(direct on) or 9995 (direct off).
The LED will light for half a second on each digit
input. Then, the LED will light for two seconds to
indicate that it’s been correctly set. (If the LED blinks
three times, then you made a mistake with the
code—try re-entering it.)
MEMO:
• TVC doesn’t have this feature and thus can’t use the
direct function.
Controlling the Rest of Your System
Checking Preset Codes
To check which preset code is associated with a MULTI
CONTROL button:
1 Press SETUP and hold for three seconds.
The LED on the remote control lights for two
seconds.
2 Press the MULTI CONTROL button you want
to check the preset code for.
3 Press and hold ENTER for two seconds.
Each preset code consists of four digits, for example
1329. Each digit will be represented by a series of
blinks on the remote’s LED—3 blinks to represent
the digit “3”, etc. (“0” is represented by 10 blinks.)
Connect to CONTROL IN
terminal of other Pioneer
products with Î mark.
Remote control unit
VSX-D810S
( VSX-D710S)
Other Pioneer products
with Î mark
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-D710S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-D710S in the language / languages: English as an attachment in your email.

The manual is 4,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-D710S

Pioneer VSX-D710S User Manual - English - 52 pages

Pioneer VSX-D710S User Manual - German - 52 pages

Pioneer VSX-D710S User Manual - Dutch - 108 pages

Pioneer VSX-D710S User Manual - French, Italian - 108 pages

Pioneer VSX-D710S User Manual - Portuguese, Swedish - 108 pages

Pioneer VSX-D710S User Manual - Spanish - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info