574068
61
Zoom out
Zoom in
Previous page
1/123
Next page
Listening to your system
06
61
En
Selecting MCACC presets
Default setting: MEMORY 1
If you have calibrated your system for different listening
positions
1
, you can switch between settings to suit the
kind of source you’re listening to and where you’re sitting
(for example, watching movies from a sofa, or playing a
video game close to the TV).
While listening to a source, press , then
press
MCACC
.
Press repeatedly to select one of the six MCACC presets
2
.
See Data Management on page 88 to check and manage
your current settings.
Choosing the input signal
On this receiver, it is possible to switch the input signals
for the different inputs as described below.
3
Press , then press
SIGNAL SEL
to select
the input signal corresponding to the source
component.
Each press cycles through the options as follows:
AUTO – The receiver selects the first available signal
in the following order: HDMI; DIGITAL; ANALOG.
ANALOG – Selects an analog signal.
DIGITAL – Selects an optical or coaxial digital signal.
HDMI – Selects an HDMI signal.
4
PCM – For PCM input signals.
5
The receiver selects
the first available signal in the following order: HDMI;
DIGITAL.
When set to DIGITAL, HDMI or AUTO (only selected
DIGITAL or HDMI), the indicators light according to the
signal being decoded, as follows:
2 DIGITAL lights with Dolby Digital decoding.
2 DIGITAL PLUS lights with Dolby Digital Plus
decoding.
2 TrueHD lights with Dolby TrueHD decoding.
DTS lights with DTS decoding.
DTS HD lights with DTS-HD decoding.
MSTR lights with DTS-HD Master Audio decoding.
96/24 lights with DTS 96/24 decoding.
WMA9 Pro lights to indicate that a WMA9 Pro signal
is being decoded.
HDMI is not assigned by default. To select an HDMI
signal, conduct the input setup procedure (see The
Input Setup menu on page 43).
Better sound using Phase Control
This receiver’s Phase Control feature uses phase
correction measures to make sure your sound source
arrives at the listening position in phase, preventing
unwanted distor tion and/or coloring of the sound.
During multichannel playback, LFE (Low-Frequency
Effects) signals as well as low-frequency signals in each
channel are assigned to the subwoofer or the other most
appropriate speaker. At least in theor y, however, this type
of processing involves a group delay that varies with
frequency, resulting in phase distortion where the low-
frequency sound is delayed or muffled by the conflict
with other channels. With the Phase Control mode
s
wit
ched on, this receiver can reproduce powerful bass
sound without deteriorating the quality of the original
sound (see illustration below).
Note
1 Different presets might also have separate calibration settings for the same listening position, depending on how you’re using your system.
These presets can be set in Automatically setting up for surround sound (Auto MCACC) on page 41 or Automatic MCACC (Expert) on page 78,
either of which you should have already completed.
2 • These settings have no effect when headphones are connected.
• You can also press / to select the MCACC preset.
3 • This receiver can only play back Dolby Digital, PCM (32 kHz to 192 kHz), DTS (including DTS 96/24) and WMA9 Pro digital signal formats.
The compatible signals via the HDMI terminals are: Dolby Digital, DTS, WMA9 Pro, PCM (32 kHz to 192 kHz), Dolby TrueHD, Dolby Digital Plus,
DTS-EXPRESS, DTS-HD Master Audio, SACD and DVD Audio (including 192 kHz). With other digital signal formats, set to ANALOG (the
MULTI CH IN and TUNER).
• You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make the proper dig
ital
con
nections (page 29) and set the signal input to DIGITAL.
• Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.
4 When the HDMI audio output parameter is set to THROUGH, the sound will be heard through your TV, not from this receiver.
INPUT
123
SLEEP
HDMI OUT
MCACCSIGNAL SEL
456
DIMMERA.ATTSBch
789
CLASS
MASTER
VOLUME
CH LEVELD.ACCESS
0
ENTER
PHASE CTRLTHX STATUS
REMOTE
SETUP
ANT
MEMORY
AUDIO
INFO
DISP
MPX PQLS
CH
RECEIVER
TV CTRL
RECEIVER
INPUT
123
SLEEP
HDMI OUT
MCACCSIGNAL SEL
456
DIMMERA.ATTSBch
789
CLASS
MASTER
VOLUME
CH LEVELD.ACCESS
0
ENTER
PHASE CTRLTHX STATUS
REMOTE
SETUP
ANT
MEMORY
AUDIO
INFO
DISP
MPX PQLS
CH
RECEIVER
TV CTRL
RECEIVER
5 • This is useful if you find there is a slight delay before AUTO recognizes the PCM signal on a CD, for instance.
• When PCM is selected, noise may be output during playback of non-PCM sources. Please select another input signal if this is a problem.
VSX-9140TXH_CUXJ.book 61 ページ 2009年4月16日 木曜日 午前10時36分
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-9140TXH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-9140TXH in the language / languages: English as an attachment in your email.

The manual is 11,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info