Manual Pioneer VSX-830 K (page 110 of 137) (English)

586462

110

Zoom out

Zoom in

1/137

110

The System Setup and Other Setup menus

3 Check on the screen whether or not an update file was found.

If “New version found.” is displayed, the update file has been found. The version number and updating time are

displayed.

If “This is the latest version. There is no need to update.” is displayed, no update file has been found.

4 To update, select OK.

The updating screen appears and updating is performed.

! The power turns off automatically once updating is completed.

Software Update messages

Status messages Descriptions

FILE ERROR

Try disconnecting then reconnecting the USB device or storing the update file again. If the error still

occurs, try using a different USB memory device.

No update file was found on the USB memory device. Store the file in the USB memory device’s root

directory.

UPDATE ERROR 1 to

UPDATE ERROR 7

Turn the receiver’s power off, then turn it back on and try updating the software again.

Update via USB

If this message flashes, updating has failed. Update via a USB memory device. Put the update file on a

USB memory device and connect the device to the USB port. When the file is found, software updating

starts automatically.

UE11

Updating has failed. Use the same procedure to update the software again.

UE22

UE33

On Screen Display Setup

When the receiver is operated, its status (the input name, listening mode, etc.) is displayed superimposed over

the video output on the display. This status display can be turned off by switching this setting to OFF. The setting

can be made for the main zone and HDZONE, respectively.

! Default: ON (both the main zone and HDZONE)

1 Select ‘On Screen Display Setup’ from the Other Setup menu.

2 Select and set the main zone or HDZONE (VSX-1130 only) for which you wish to change the

setting.

3 Select the On Screen Display setting you want.

4 When you’re finished, press RETURN.

You will return to the Other Setup menu.

Notes

! The on-screen display is only displayed for video output from the HDMI terminal.

! When the video input signal is a 3D signal, the on-screen display may not be displayed.

! The size of the characters displayed differs according to the output resolution.

Remote Control Mode Setup

VSX-1130 only

! Default setting: 1

This sets this receiver’s remote control mode to prevent erroneous operation when multiple units of the receiver

are being used.

1 Select ‘Remote Control Mode Setup’ from the Other Setup menu.

2 Select the Remote Control Mode setting you want.

3 Select ‘OK’ to change the remote control mode.

4 Follow the instructions on the screen to change the remote control’s setting.

See Operating multiple receivers on page 93 .

5 When you’re finished, press RETURN.

You will return to the Other Setup menu.

ZONE Setup

VSX-1130 only

Switches the sub-zone setting.

1 Select ‘ZONE Setup’ from the Other Setup menu.

2 Select ‘MAIN/HDZONE’, then press ENTER.

3 Set the usage of the HDMI OUT 2 terminal.

! MAIN: Select this to output the same input source as in the main zone.

After setting this to MAIN, exit the home menu, then press OUT P. and select the terminal for HDMI output

(page 89 ).

! HDZONE (default): Use the HDMI output’s multizone function (HDZONE) to output an input source different

from the one in the main zone (page 89 ).

4 Select ‘OK’, then press ENTER.

5 When you’re finished, press RETURN.

You will return to the Other Setup menu.

unable to get sound out of the rear speakers, can you help please Submitted on 9-4-2021 at 12:43
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-830 K in the language / languages: English as an attachment in your email.

The manual is 20,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-830 K

Pioneer VSX-830 K User Manual - German - 146 pages

Pioneer VSX-830 K User Manual - Dutch - 146 pages

Pioneer VSX-830 K User Manual - French - 145 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer VSX-830 K Manual

Product: