Manual Pioneer VSX-830 K (page 109 of 137) (English)

586462

109

Zoom out

Zoom in

1/137

109

The System Setup and Other Setup menus

The Other Setup menu

The Other Setup menu is where you can make customized settings to reflect how you are using the receiver.

1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and

then press HOME MENU.

A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the

screens and select menu items. Press RETURN to exit the current menu.

2 Select ‘System Setup’ from the HOME MENU.

3 Select ‘Other Setup’, then press ENTER.

4 Select the setting you want to adjust.

If you are doing this for the first time, you may want to adjust these settings in order:

! Auto Power Down – Sets the power to turn off automatically when the receiver is not being used (page 109 ).

! Volume Setup – Sets up the volume-related operations of this receiver (page 109 ).

! Software Update – Use to update the receiver’s software and check the version (page 109 ).

! On Screen Display Setup (VSX-1130 only) – Sets whether or not to display the status on the display when the

receiver is operated (page 110 ).

! Remote Control Mode Setup (VSX-1130 only) – Sets this receiver’s remote control mode (page 110 ).

! ZONE Setup (VSX-1130 only) – Use to make the sub zone-related settings (page 110 ).

5 Make the adjustments necessary for each setting, pressing RETURN to confirm after each

screen.

Auto Power Down

The power can be set to turn off automatically if no operation has been performed for a specific amount of time

with no audio or video signals being input to the receiver.

VSX-1130 only: When using HDZONE, the HDZONE power can also be set to turn off, but for HDZONE the power

turns off automatically after the amount of time set here even if signals are being input or operations have been

performed. Different times can be set for the main zone and HDZONE.

1 Select ‘Auto Power Down’ from the Other Setup menu.

2 Select the zone you want to set and set the time after which the power turns off.

! MAIN – The time can be selected from among “15 min”, “30 min”, “60 min” and “OFF”. The power turns off

after there has been no signal and no operation for the selected time.

! HDZONE (VSX-1130 only) – The time can be selected from among “30 min”, “1 hour”, “3 hours”, “6 hours”,

“9 hours” and “OFF”. The power turns off after the selected time.

Notes

! Depending on the connected devices, the Auto Power Down function may not work properly due to excessive

noise or other reasons.

! When using WAC mode (page 54 ), this feature does not work.

Volume Setup

You can set the maximum volume of this receiver or specify what the volume level will be when the power is

turned on.

1 Select ‘Volume Setup’ from the Other Setup menu.

2 Select the Power ON Level setting you want.

The volume can be set so that it is always set to the same level when the receiver’s power is turned on.

! LAST (default) – When the power is turned on, the volume is set to the same level as when the power was last

turned off.

! “---” – When the power is turned on, the volume is set to minimum level.

! –80.0dB to +12.0dB – Specify the volume to be set when the power is turned on, in steps of 0.5 dB.

It is not possible to set a volume level greater than the value specified at Volume Limit setup (see below).

3 Select the Volume Limit setting you want.

Use this function to limit the maximum volume. The volume cannot be increased above the level set here, even by

operating VOLUME button (or the dial on the front panel).

! OFF (default) – The maximum volume is not limited.

! –20.0dB/–15.0dB/–10.0dB/–5.0dB/0.0dB – The maximum volume is limited to the value set here.

4 Select the Mute Level setting you want.

This sets how much the volume is to be turned down when MUTE is pressed.

! FULL (default) – No sound.

! –40.0dB/–20.0dB – The volume will be turned down to the level specified here.

5 When you’re finished, press RETURN.

You will return to the Other Setup menu.

Software Update

Use this procedure to update the receiver’s software and check the version. There are two ways to update: via the

Internet and via a USB memory device.

Updating via the Internet is performed by accessing the file server from the receiver and downloading the file.

This procedure is only possible if the receiver is connected to the Internet.

Updating via a USB memory device is performed by downloading the update file from a computer, reading this

file onto a USB memory device then inserting this USB memory device into the USB port on the receiver’s front

panel. With this procedure, the USB memory device containing the update file must first be inserted into the USB

port on the receiver’s front panel.

! If an update file is provided on the Pioneer website, download it onto your computer. When downloading an

update file from the Pioneer website onto your computer, the file will be in ZIP format. Unzip the ZIP file before

saving it on the USB memory device. If there are any old downloaded files or downloaded files for other models

on the USB memory device, delete them.

http://www.pioneerelectronics.com

! If an update file does not exist in the Pioneer’s website, updating the software for the receiver is not necessary.

Important

! DO NOT unplug the power cord during updating.

! When updating via the Internet, do not disconnect the LAN cable. When updating via a USB memory device,

do not disconnect the USB memory device.

! If updating is interrupted before it is completed, start updating over from the beginning.

! The receiver’s settings may be reset when the software is updated. Information on the models for which the

settings are reset is provided on the Pioneer website. Check the website before updating.

1 Select ‘Software Update’ from the Other Setup menu.

2 Select the update procedure.

! Update via Internet – The receiver checks whether updatable software is available via the Internet.

! Update via USB Memory – The receiver checks whether the USB memory device inserted into the USB port

on the receiver’s front panel contains updatable software.

“Accessing” is displayed and the update file is checked. Wait a while.

unable to get sound out of the rear speakers, can you help please Submitted on 9-4-2021 at 12:43
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-830 K in the language / languages: English as an attachment in your email.

The manual is 20,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-830 K

Pioneer VSX-830 K User Manual - German - 146 pages

Pioneer VSX-830 K User Manual - Dutch - 146 pages

Pioneer VSX-830 K User Manual - French - 145 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer VSX-830 K Manual

Product: