Manual Pioneer VSX-830 K (page 58 of 137) (English)

586462

Zoom out

Zoom in

1/137

Basic Setup

Play ZONE Setup

VSX-1130 only

You can select what zone to play when playing via AirPlay and Bluetooth equipped devices as well as when play-

ing audio content on equipment in the home network in DMR mode.

! For playable DLNA-compatible network devices, see page 76 .

1 Select ‘Play ZONE Setup’ from the Network Option menu.

2 Select the zone in which you want to play the audio contents.

3 When you’re finished, press RETURN.

You will return to the Network Option menu.

Notes

! If another zone is on, it may not be possible to play the audio contents. In this case, turn the other zone off,

then play the audio contents.

! MAIN/HDZONE at ZONE Setup must be set to HDZONE in order to use the HDZONE function (page 110 ).

Automatically conducting optimum sound tuning (Full Auto MCACC)

The Full Auto MCACC Setup measures the acoustic characteristics of your listening area, taking into account

ambient noise, speaker connection and speaker size, and tests for both channel delay and channel level. When

Measurement Type is Expert, in addition to this, Standing Wave, Reverb chracteristics, Full Band Phase

Control (VSX-1130 only) and EQ are measured. After you have set up the microphone provided with your system,

the receiver uses the information from a series of test tones to optimize the speaker settings and equalization for

your particular room.

Important

! Make sure the microphone and speakers are not moved during the Full Auto MCACC Setup.

! Using the Full Auto MCACC Setup will overwrite any existing settings for the MCACC preset you select.

! Before using the Full Auto MCACC Setup, the headphones should be disconnected.

! With factory default settings, the on-screen display will be output from all HDMI output terminals and dis-

played on any TV connected via HDMI cable.

VSX-1130 only: You can change where the screen is output in the MAIN/HDZONE (page 110 ) and HDMI out-

put (page 89 ) settings.

CAUTION

! The test tones used in the Full Auto MCACC Setup are output at high volume.

1 Press u STANDBY/ON to switch on the receiver and your TV.

Make sure that the TV’s video input is set to this receiver.

2 Connect the microphone to the MCACC SETUP MIC jack on the front panel.

Microphone

Tripod

Make sure there are no obstacles between the speakers and the microphone.

If you have a tripod, use it to place the microphone so that it’s about ear level at your normal listening position. If

you do not have a tripod, use some other object to install the microphone.

Install the microphone on a stable floor. Placing the microphone on any of the following surfaces may make

accurate measurement impossible:

! Sofas or other soft surfaces.

! High places such as tabletops and sofa tops.

The Full Auto MCACC display appears once the microphone is connected.

Speaker System : 7.2ch/5.2.2ch

Exit

2a.Full Auto MCACC

Return

START

EQ Type : SYMMETRY

SP to ceiling : – – –

MCACC : M1.MEMORY 1

Dolby Enabled Speaker

: NO

Measurement Type : Expert

! If you leave the GUI screen for over five minutes, the screen saver will appear.

3 Press MAIN RECEIVER to switch the remote control to the receiver operation mode.

4 Select the parameters you want to set.

When the speaker system is not 7.2ch/5.2.2ch (VSX-1130)/5.2ch (VSX-830), set Speaker System before measur-

ing full auto MCACC. For details, see Speaker system setting on page 106 .

! Speaker System – Shows the current settings. When this is selected and ENTER is pressed, the speaker

system selection screen appears. Select the proper speaker system, then press RETURN to return.

If you are planning on bi-amping your front speakers, or setting up a separate speaker system in another

room, read through Speaker system setting on page 106 and make sure to connect your speakers as neces-

sary before continuing to step 4.

! EQ Type – When you select Expert for Measurement Type, set the correction method of the frequency char-

acteristics of the viewing environment. Usually, set SYMMETRY. For details, see Automatic MCACC (Expert)

on page 99 .

unable to get sound out of the rear speakers, can you help please Submitted on 9-4-2021 at 12:43
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-830 K in the language / languages: English as an attachment in your email.

The manual is 20,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-830 K

Pioneer VSX-830 K User Manual - German - 146 pages

Pioneer VSX-830 K User Manual - Dutch - 146 pages

Pioneer VSX-830 K User Manual - French - 145 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer VSX-830 K Manual

Product: