699667
34
Zoom out
Zoom in
Previous page
1/41
Next page
34
2
2
2
8
35
4
Connecting your equipment
Placing the speakers
By connecting the left and right front speakers (L/R), the center speaker (C), the left and right
surround speakers (SL/SR), and the subwoofer (SW), a 5.1 ch surround system can be
enjoyed.
To achieve the best possible surround sound, install your speakers as shown below.
Hints on the speaker placement
Where you put your speakers in the room has a big effect on the quality of the sound. The
following guidelines should help you to get the best sound from your system.
The subwoofer can be placed on the floor. Ideally, the other speakers should be at about
ear-level when you’re listening to them. Putting the speakers on the floor (except the
subwoofer), or mounting them very high on a wall is not recommended.
For the best stereo effect, place the front speakers 2 m to 3 m apart, at equal distance from
the TV.
If you’re going to place speakers around your CRT TV, use shielded speakers or place the
speakers at a sufficient distance from your CRT TV.
If you’re using a center speaker, place the front speakers at a wider angle. If not, place
them at a narrower angle.
Place the center speaker above or below the TV so that the sound of the center channel is
localized at the TV screen. Also, make sure the center speaker does not cross the line
formed by the leading edge of the front left and right speakers.
It is best to angle the speakers towards the listening position. The angle depends on the
size of the room. Use less of an angle for bigger rooms.
The optimal positioning for surround speakers is just above ear height. Make sure the
speakers don’t face each other. For DVD-Audio, the speakers should be more directly
behind the listener than for home theater playback.
Try not to place the surround speakers farther away from the listening position than the
front and center speakers. Doing so can weaken the surround sound effect.
CAUTION
Make sure that all speakers are securely installed. This not only improves sound quality,
but also reduces the risk of damage or injury resulting from speakers being knocked over
or falling in the event of external shocks such as earthquakes.
120
120
SL
L
SW
C
R
SR
5.1 channel surround system:
2
2
2
8
35
4
Connecting your equipment
Placing the speakers
By connecting the left and right front speakers (L/R), the center speaker (C), the left and right
surround speakers (SL/SR), and the subwoofer (SW), a 5.1 ch surround system can be
enjoyed.
To achieve the best possible surround sound, install your speakers as shown below.
Hints on the speaker placement
Where you put your speakers in the room has a big effect on the quality of the sound. The
following guidelines should help you to get the best sound from your system.
The subwoofer can be placed on the floor. Ideally, the other speakers should be at about
ear-level when you’re listening to them. Putting the speakers on the floor (except the
subwoofer), or mounting them very high on a wall is not recommended.
For the best stereo effect, place the front speakers 2 m to 3 m apart, at equal distance from
the TV.
If you’re going to place speakers around your CRT TV, use shielded speakers or place the
speakers at a sufficient distance from your CRT TV.
If you’re using a center speaker, place the front speakers at a wider angle. If not, place
them at a narrower angle.
Place the center speaker above or below the TV so that the sound of the center channel is
localized at the TV screen. Also, make sure the center speaker does not cross the line
formed by the leading edge of the front left and right speakers.
It is best to angle the speakers towards the listening position. The angle depends on the
size of the room. Use less of an angle for bigger rooms.
The optimal positioning for surround speakers is just above ear height. Make sure the
speakers don’t face each other. For DVD-Audio, the speakers should be more directly
behind the listener than for home theater playback.
Try not to place the surround speakers farther away from the listening position than the
front and center speakers. Doing so can weaken the surround sound effect.
CAUTION
Make sure that all speakers are securely installed. This not only improves sound quality,
but also reduces the risk of damage or injury resulting from speakers being knocked over
or falling in the event of external shocks such as earthquakes.
120
120
SL
L
SW
C
R
SR
5.1 channel surround system:
2
2
2
8
35
4
Connecting your equipment
Placing the speakers
By connecting the left and right front speakers (L/R), the center speaker (C), the left and right
surround speakers (SL/SR), and the subwoofer (SW), a 5.1 ch surround system can be
enjoyed.
To achieve the best possible surround sound, install your speakers as shown below.
Hints on the speaker placement
Where you put your speakers in the room has a big effect on the quality of the sound. The
following guidelines should help you to get the best sound from your system.
The subwoofer can be placed on the floor. Ideally, the other speakers should be at about
ear-level when you’re listening to them. Putting the speakers on the floor (except the
subwoofer), or mounting them very high on a wall is not recommended.
For the best stereo effect, place the front speakers 2 m to 3 m apart, at equal distance from
the TV.
If you’re going to place speakers around your CRT TV, use shielded speakers or place the
speakers at a sufficient distance from your CRT TV.
If you’re using a center speaker, place the front speakers at a wider angle. If not, place
them at a narrower angle.
Place the center speaker above or below the TV so that the sound of the center channel is
localized at the TV screen. Also, make sure the center speaker does not cross the line
formed by the leading edge of the front left and right speakers.
It is best to angle the speakers towards the listening position. The angle depends on the
size of the room. Use less of an angle for bigger rooms.
The optimal positioning for surround speakers is just above ear height. Make sure the
speakers don’t face each other. For DVD-Audio, the speakers should be more directly
behind the listener than for home theater playback.
Try not to place the surround speakers farther away from the listening position than the
front and center speakers. Doing so can weaken the surround sound effect.
CAUTION
Make sure that all speakers are securely installed. This not only improves sound quality,
but also reduces the risk of damage or injury resulting from speakers being knocked over
or falling in the event of external shocks such as earthquakes.
120
120
SL
L
SW
C
R
SR
5.1 channel surround system:
6
Kotivalikko
6
Home Menu
6
6
34
2
35
4
The DAB Setup menu
Scan stations newly or make the DRC setting.
DAB Scan
You can run the auto scan when new DAB stations are
added or when you move house.
1
Select “DAB Setup” from the Home Menu.
2
Select “DAB SCAN” from the DAB Setup menu.
Scanning will start after you press
ENTER
. After the
scanning process is complete, “COMPLETE” appears
on the display.
To finish the operation, make sure OKis selected, then
press
ENTER
. If you try scanning again, select RETRY
using
/
, and press
ENTER
.
If no station can be found, “NO STATION” will appear.
To finish the operation, make sure “OK” is selected,
then press
ENTER
. If you scan again, select RETRY
using
/
, and press
ENTER
.
To stop the scan operation before it is complete, press
RETURN
.
3
When you’re finished, press
RETURN
.
You return to the Home Menu.
DAB DRC
With the DRC (Dynamic Range Control) setting, you can
reduce the dynamic range of DAB digital radio so that you
can still hear quiet parts even when listening at low volume
levels - ideal for listening to the radio late at night when you
don't want to disturb anyone.
Default: 0
1
Select “DAB Setup” from the Home Menu.
2
Select “DAB DRC” from the DAB Setup menu.
3
Select the level that you want to set.
You can select 0 (DRC off), 1 (large reduction) or 1/2
(small reduction).
4
When you’re finished, press
RETURN
.
You return to the Home Menu.
Home Menu
1.Full Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Auto Power Down
5.HDMI Setup
Return
6.DAB Setup
6. DAB Setup
Return
a. DAB SCAN
b. DAB DRC
[
START
]
[
0
]
Home Menu
1.Full Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Auto Power Down
5.HDMI Setup
Return
6.DAB Setup
6. DAB Setup
Return
a. DAB SCAN
b. DAB DRC 0
[
START
]
Home Menu
6
6
34
2
35
4
The DAB Setup menu
Scan stations newly or make the DRC setting.
DAB Scan
You can run the auto scan when new DAB stations are
added or when you move house.
1
Select “DAB Setup” from the Home Menu.
2
Select “DAB SCAN” from the DAB Setup menu.
Scanning will start after you press
ENTER
. After the
scanning process is complete, “COMPLETE” appears
on the display.
To finish the operation, make sure OKis selected, then
press
ENTER
. If you try scanning again, select RETRY
using
/
, and press
ENTER
.
If no station can be found, “NO STATION” will appear.
To finish the operation, make sure “OK” is selected,
then press
ENTER
. If you scan again, select RETRY
using
/
, and press
ENTER
.
To stop the scan operation before it is complete, press
RETURN
.
3
When you’re finished, press
RETURN
.
You return to the Home Menu.
DAB DRC
With the DRC (Dynamic Range Control) setting, you can
reduce the dynamic range of DAB digital radio so that you
can still hear quiet parts even when listening at low volume
levels - ideal for listening to the radio late at night when you
don't want to disturb anyone.
Default: 0
1
Select “DAB Setup” from the Home Menu.
2
Select “DAB DRC” from the DAB Setup menu.
3
Select the level that you want to set.
You can select 0 (DRC off), 1 (large reduction) or 1/2
(small reduction).
4
When you’re finished, press
RETURN
.
You return to the Home Menu.
Home Menu
1.Full Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Auto Power Down
5.HDMI Setup
Return
6.DAB Setup
6. DAB Setup
Return
a. DAB SCAN
b. DAB DRC
[
START
]
[
0
]
Home Menu
1.Full Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Auto Power Down
5.HDMI Setup
Return
6.DAB Setup
6. DAB Setup
Return
a. DAB SCAN
b. DAB DRC 0
[
START
]
DAB-asetuksien valikko
Hae uusia kanavia tai säädä DRC-asetusta.
DAB-haku
Voit tehdä automaattisen haun uusien DAB-kanavien
lisäämiseksi tai kun olet muuttanut.
1 Valitse kotivalikosta ’DAB Setup’
2 Valitse DAB Setupista ’DAB SCAN’
Haku alkaa, kun painat
ENTER
. Kun haku on valmis,
näyttöruudussa on ’COMPLETE’.
Varmista toimenpiteen lopuksi, että valitset ’OK
ja paina
ENTER
. Jos haluat uuden haun, valitse
näppäimillä RETRY ja paina
ENTER
.
Jos kanavia ei löydy, näyttöruudussa on ’NO
STATION’. Toimenpiteen lopuksi, valitse ’OK ja
paina
ENTER
. Jos haet vielä, valitse näppäimillä
RETRY ja paina
ENTER
.
Voit keskeyttää haun ennen sen valmistumista
painamalla
RETURN
.
3 Kun olet valmis, paina
RETURN
.
Palaat kotivalikkoon.
DAB DRC
DRC:llä (Dynamic Range Control) voit kaventaa
digitaalisen DAB-radion dynaamista vaihtelua, jotta kuulet
hiljaisetkin jaksot pienellä volyymillä – tämä sopii radion
kuunteluun yöllä muita häiritsemättä.
Oletus: 0
1 Valitse kotivalikosta ’DAB Setup’.
2 Valitse DAB Setup-valikosta ’DAB DRC’.
3 Valitse haluamasi arvo
0 – DRC ei päällä,
1 – runsas kavennus tai
½ - pieni kavennus
4 Kun olet valmis, paina
RETURN
.
Palaat kotivalikkoon.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-531D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-531D in the language / languages: Finnish as an attachment in your email.

The manual is 10,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-531D

Pioneer VSX-531D User Manual - English - 41 pages

Pioneer VSX-531D User Manual - German - 41 pages

Pioneer VSX-531D User Manual - Dutch - 41 pages

Pioneer VSX-531D User Manual - French - 41 pages

Pioneer VSX-531D User Manual - Italian - 41 pages

Pioneer VSX-531D User Manual - Spanish - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info