699667
21
Zoom out
Zoom in
Previous page
1/41
Next page
21
2
2
2
8
35
4
Connecting your equipment
Placing the speakers
By connecting the left and right front speakers (L/R), the center speaker (C), the left and right
surround speakers (SL/SR), and the subwoofer (SW), a 5.1 ch surround system can be
enjoyed.
To achieve the best possible surround sound, install your speakers as shown below.
Hints on the speaker placement
Where you put your speakers in the room has a big effect on the quality of the sound. The
following guidelines should help you to get the best sound from your system.
The subwoofer can be placed on the floor. Ideally, the other speakers should be at about
ear-level when you’re listening to them. Putting the speakers on the floor (except the
subwoofer), or mounting them very high on a wall is not recommended.
For the best stereo effect, place the front speakers 2 m to 3 m apart, at equal distance from
the TV.
If you’re going to place speakers around your CRT TV, use shielded speakers or place the
speakers at a sufficient distance from your CRT TV.
If you’re using a center speaker, place the front speakers at a wider angle. If not, place
them at a narrower angle.
Place the center speaker above or below the TV so that the sound of the center channel is
localized at the TV screen. Also, make sure the center speaker does not cross the line
formed by the leading edge of the front left and right speakers.
It is best to angle the speakers towards the listening position. The angle depends on the
size of the room. Use less of an angle for bigger rooms.
The optimal positioning for surround speakers is just above ear height. Make sure the
speakers don’t face each other. For DVD-Audio, the speakers should be more directly
behind the listener than for home theater playback.
Try not to place the surround speakers farther away from the listening position than the
front and center speakers. Doing so can weaken the surround sound effect.
CAUTION
Make sure that all speakers are securely installed. This not only improves sound quality,
but also reduces the risk of damage or injury resulting from speakers being knocked over
or falling in the event of external shocks such as earthquakes.
120
120
SL
L
SW
C
R
SR
5.1 channel surround system:
2
2
2
8
35
4
Connecting your equipment
Placing the speakers
By connecting the left and right front speakers (L/R), the center speaker (C), the left and right
surround speakers (SL/SR), and the subwoofer (SW), a 5.1 ch surround system can be
enjoyed.
To achieve the best possible surround sound, install your speakers as shown below.
Hints on the speaker placement
Where you put your speakers in the room has a big effect on the quality of the sound. The
following guidelines should help you to get the best sound from your system.
The subwoofer can be placed on the floor. Ideally, the other speakers should be at about
ear-level when you’re listening to them. Putting the speakers on the floor (except the
subwoofer), or mounting them very high on a wall is not recommended.
For the best stereo effect, place the front speakers 2 m to 3 m apart, at equal distance from
the TV.
If you’re going to place speakers around your CRT TV, use shielded speakers or place the
speakers at a sufficient distance from your CRT TV.
If you’re using a center speaker, place the front speakers at a wider angle. If not, place
them at a narrower angle.
Place the center speaker above or below the TV so that the sound of the center channel is
localized at the TV screen. Also, make sure the center speaker does not cross the line
formed by the leading edge of the front left and right speakers.
It is best to angle the speakers towards the listening position. The angle depends on the
size of the room. Use less of an angle for bigger rooms.
The optimal positioning for surround speakers is just above ear height. Make sure the
speakers don’t face each other. For DVD-Audio, the speakers should be more directly
behind the listener than for home theater playback.
Try not to place the surround speakers farther away from the listening position than the
front and center speakers. Doing so can weaken the surround sound effect.
CAUTION
Make sure that all speakers are securely installed. This not only improves sound quality,
but also reduces the risk of damage or injury resulting from speakers being knocked over
or falling in the event of external shocks such as earthquakes.
120
120
SL
L
SW
C
R
SR
5.1 channel surround system:
2
2
2
8
35
4
Connecting your equipment
Placing the speakers
By connecting the left and right front speakers (L/R), the center speaker (C), the left and right
surround speakers (SL/SR), and the subwoofer (SW), a 5.1 ch surround system can be
enjoyed.
To achieve the best possible surround sound, install your speakers as shown below.
Hints on the speaker placement
Where you put your speakers in the room has a big effect on the quality of the sound. The
following guidelines should help you to get the best sound from your system.
The subwoofer can be placed on the floor. Ideally, the other speakers should be at about
ear-level when you’re listening to them. Putting the speakers on the floor (except the
subwoofer), or mounting them very high on a wall is not recommended.
For the best stereo effect, place the front speakers 2 m to 3 m apart, at equal distance from
the TV.
If you’re going to place speakers around your CRT TV, use shielded speakers or place the
speakers at a sufficient distance from your CRT TV.
If you’re using a center speaker, place the front speakers at a wider angle. If not, place
them at a narrower angle.
Place the center speaker above or below the TV so that the sound of the center channel is
localized at the TV screen. Also, make sure the center speaker does not cross the line
formed by the leading edge of the front left and right speakers.
It is best to angle the speakers towards the listening position. The angle depends on the
size of the room. Use less of an angle for bigger rooms.
The optimal positioning for surround speakers is just above ear height. Make sure the
speakers don’t face each other. For DVD-Audio, the speakers should be more directly
behind the listener than for home theater playback.
Try not to place the surround speakers farther away from the listening position than the
front and center speakers. Doing so can weaken the surround sound effect.
CAUTION
Make sure that all speakers are securely installed. This not only improves sound quality,
but also reduces the risk of damage or injury resulting from speakers being knocked over
or falling in the event of external shocks such as earthquakes.
120
120
SL
L
SW
C
R
SR
5.1 channel surround system:
4
4
Perussoitto
Basic playback
4
4
21
2
35
4
Music playback using BLUETOOTH
®
wireless technology
You can wirelessly enjoy music files stored in a smartphone
or other BLUETOOTH capable device. The coverage area is
about 10 meters.
Note
The BLUETOOTH
®
word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc.
The BLUETOOTH wireless technology enabled device
must support A2DP profiles.
We do not guarantee proper connection and operation of
this unit with all BLUETOOTH wireless technology
enabled devices.
Pairing with the unit (Initial registration)
Pairing should be performed when first using the unit with the
BLUETOOTH capable device, or when the pairing data on
the device has been erased for any reason.
After pressing the
BT
and switching to BT Audio function,
perform the pairing procedure on the BLUETOOTH
capable device. If pairing has been performed correctly,
you will not need to perform the pairing procedures for the
unit as shown below.
1
Press the
BT
.
2
Turn on the power to the BLUETOOTH capable device
that you wish to pair with, and perform pairing
procedure on it.
This unit will be displayed as “Pioneer VSX-531D” on
all BLUETOOTH capable devices that you have.
Pairing will start.
Place the BLUETOOTH capable device close to the
unit.
Please refer to the user’s manual for your
BLUETOOTH capable device for details on when
pairing can be performed and the procedures
required for pairing.
When PIN code entry is requested, enter “0000”. (This
unit does not accept any PIN code setting other than
“0000”.)
3
Confirm on the BLUETOOTH capable device that
pairing has been completed.
If pairing with the BLUETOOTH capable device has
been completed correctly “CONNECT” will be displayed.
Listen to music on the unit from a BLUETOOTH
capable device
1
Press the
BT
.
The unit will switch to BT Audio input.
2
A BLUETOOTH connection will be created between the
BLUETOOTH capable device and the unit.
Procedures for connecting to the unit should be
performed from the BLUETOOTH capable device.
Please refer to the user’s manual for your
BLUETOOTH capable device for details of the
connection procedures.
3
Playback music from the BLUETOOTH capable device.
Radio wave caution
This unit uses a 2.4 GHz radio wave frequency, which is a
band used by other wireless systems (see list below). To
prevent noise or interrupted communication, do not use this
unit nearby such devices, or make sure these devices are
switched off during use.
Cordless phones
Cordless facsimiles
Microwave ovens
Wireless LAN devices (IEEE802.11b/g)
Wireless AV equipment
Wireless controllers for game systems
Microwave-based health aids
Some baby monitors
Other, less common, equipment that may operate on the
same frequency:
Anti-theft systems
Amateur radio stations (HAM)
Warehouse logistic management systems
Discrimination systems for train or emergency vehicles
Note
In the event noise appears in your television image, there
is the possibility that a BLUETOOTH wireless technology
enabled device or this unit (including products supported
by this unit) are causing signal interference with the
antenna input connector of your television, video, satellite
tuner, etc. In this event, increase the distance between the
antenna input connector and the BLUETOOTH wireless
technology enabled device or this unit (including products
supported by this unit).
If there is something obstructing the path between this unit
(including devices supported by this unit) and the device
equipped with BLUETOOTH wireless technology (such as
a metal door, concrete wall, or insulation containing tinfoil),
you may need to change the location of your system to
prevent signal noise and interruptions.
Scope of operation
Use of this unit is limited to home use. (Transmission
distances may be reduced depending on communication
environment.)
PHASE
S.RETRIEVER
BT AUDIOBT AUDIO
TRE
BASS
CBLBD
S.BOX
CD
GAME
TV
USBTUN
AUX
BT
Musiikin soitto käyttäen langatonta
BLUETOOTH-teknologiaa
Voi kuunnella langattomasti älypuhelimelle tai muulle
BLUETOOTH-laitteelle tallennettuja musiikkitiedostoja.
Kantama on noin 10 metriä.
Huomio
BLUETOOTH-sanamerkki ja logot ovat Bluetooth SIG
Inc.’in rekisteröityjä tuotemerkkejä.
Langattoman BLUETOOTH-laitteen on tuettava A2DP-
proileja.
Emme takaa kaikkien langattomien BLUETOOTH-
laitteiden kytkeytyvän ja toimivan täysin tämän
vastaanottimen kanssa.
Laitepari (Alkurekisteröinti)
Laitepari tulee muodostaa käytettäessä BLUETOOTH-
laitetta vastaanottimen kansa ensi kertaa, tai jos aiemmat
paritiedot on jostain syystä poistettu.
Paina
BT
ja siirry BT Audio -toimintoon. Muodosta
laitepari BLUETOOTH-laittteen kanssa. Jos pari on
muodostettu oikein, alla kuvattua toimenpidettä ei enää
tarvita.
1 Paina
BT
.
2 Kytke virta siihen BLUETOOTH-laitteeseen, jonka
kanssa haluat muodostaa parin ja muodosta pari
kyseisen laitteen asetuksilla.
Bluetooth-laitteessa vastaanottimen nimenä on
”Pioneer VSX-531D”.
Pari muodostetaan.
Asete BLUETOOTH-laite lähelle vastaanotinta.
Katso BLUETOOTH-laitteen ohjeista parin
muodostamisen yksityiskohdat ja tarpeelliset
toimenpiteet.
Jos tarvitaan PIN-koodin syöttö, syötä ”0000”.
(Tälle laitteelle ei voi antaa muuta PIN-koodia kuin
”0000”).
3 Varmista BLUETOOTH-laitteelta, että pari on
muodostettu.
Jos parin muodostaminen on onnistunut täysin,
näytössä on ”CONNECT”.
Kuuntele musiikkia BLUETOOTH-laitteelta
1 Paina BT.
Vastaanottimen tuloliitännäksi valitaan BT Audio.
2 BLUETOOTH-yhteys luodaan BLUETOOTH-
laitteen ja vastaanottimen välille.
Kytkeytyminen vastaanottimeen tehdään
BLUETOOTH-laitteelta käsin.
Katso yksityiskohdat kytkeytymisestä BLUETOOTH-
laitteen ohjeista.
3 Soita musiikkia BLUETOOTH-laitteelta
Tärkeää radioaalloista
Tämä laite käyttää radioaaltotaajuutta 2,4 GHz ja samaa
kaistaa käyttävät monet muutkin langattomat järjestelmät
(katso lista alla). Estä kohinaa ja katkoksia yhteydessä,
äläkä käytä vastaanotinta näiden läheisyydessä tai
sammuta nämä laitteet:
Langattomat puhelimet
Langattomat faksit
Mikroaaltouunit
Langattomat verkkolaitteet (IEEE802.11b/g)
Langattomat AV-laitteet
Pelikonsoleiden langattomat ohjaimet
Mikroaaltoja käyttävät terveystuotteet
Jotkut itkuhälyttimet
Samalla taajuudella saattavat toimia harvinaisemmat
laitteet:
Varkaudenestojärjestelmät
Amatööriradioasemat (HAM)
Varastojen logistiikkajärjestelmät
Junien tai hälytysajoneuvojen varoitusjärjestelmät
Huomio
Mikäli television kuvassa näkyy häiriötä, mahdollisesti
langaton BLUETOOTH-laite tai tämä vastaanotin (tai
jokin siihen kytketty laite) aiheuttaa häiriösignaalin TV:n,
videon tai satelliittivirittimen antennin tuloliitännälle.
Tällaisessa tapauksessa vie BLUETOOTH-laite
kauemmas antenniliittimestä tai vastaanottimesta (sekä
kytketyistä laitteista).
Jos vastaanottimen ja BLUETOOTH-laitteen välisen
suoran yhteyden sisällä on este (kuten metalliovi,
betoniseinä tai folioeriste), sinun on ehkä siirrettävä
järjestelmä toiseen paikkaan kohinan ja katkoksien
estämiseksi.
Käyttötarkoitus
Tämä laite on tarkoitettu kotikäyttöön. Ympäristöstä
riippuen viestinnän toimiva yhteys voi olla lyhyempi.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-531D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-531D in the language / languages: Finnish as an attachment in your email.

The manual is 10,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-531D

Pioneer VSX-531D User Manual - English - 41 pages

Pioneer VSX-531D User Manual - German - 41 pages

Pioneer VSX-531D User Manual - Dutch - 41 pages

Pioneer VSX-531D User Manual - French - 41 pages

Pioneer VSX-531D User Manual - Italian - 41 pages

Pioneer VSX-531D User Manual - Spanish - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info