574064
69
Zoom out
Zoom in
Previous page
1/136
Next page
Control with HDMI function 07
69
En
Before using synchronization
Once you have finished all connections and
settings, you must:
1 Put all components into standby mode.
2 Turn the power on for all components,
with the power for the TV being turned on
last.
3 Choose the HDMI input to which the TV is
connected to this receiver, and see if video
output from connected components displays
properly on the screen or not.
4 Check whether the components
connected to all HDMI inputs are properly
displayed.
About synchronized
operations
The Control with HDMI-compatible
component connected to the receiver operates
in sync as described below.
From the menu screen of the Control with
HDMI-compatible TV, set audio to be
played through this receiver, and the
receiver will switch to the synchronized
amp mode.
When in the synchronized amp mode, you
can adjust the receiver’s volume or mute
the sound using the TV’s remote control.
When in the synchronized amp mode, the
synchronized amp mode is canceled when
the receiver’s power is turned off. To turn
the synchronized amp mode back on, set
audio to be played through the receiver
from the TV’s menu screen, etc. This
receiver will power up and switch to the
synchronized amp mode.
When the synchronized amp mode is
canceled, the receiver’s power turns off if
you were viewing an HDMI input or a TV
program on the TV.
When in the synchronized amp mode, the
synchronized amp mode is canceled if an
operation that produces sound from the TV
is performed from the TV’s menu screen,
etc.
When the TV’s power is set to standby, the
receiver’s power is also set to standby.
(Only when the input for a component
connected to the receiver by HDMI
connection is selected or when watching
the TV.)
The receiver’s input switches automatically
when the Control with HDMI-compatible
component is played.
The receiver’s input switches automatically
when the TV’s channel is switched.
The synchronized amp mode remains in
effect even if the receiver’s input is
switched to a component other than one
connected by HDMI.
The operations below can also be used on
Pioneer Control with HDMI-compatible TVs.
When the receiver’s volume is adjusted or
the sound is muted, the volume status is
displayed on the TV’s screen.
When the OSD language is switched on
the TV, the receiver’s language setting also
switches accordingly.
VSX-31_30_UC.book 69 ページ 2010年8月25日 水曜日 午前9時28分
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-30 in the language / languages: English as an attachment in your email.

The manual is 8,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info