574064
68
Zoom out
Zoom in
Previous page
1/136
Next page
Control with HDMI function07
68
En
HDMI Setup
You must adjust the settings of this receiver as
well as the connected Control with HDMI-
compatible components in order to make use
of the Control with HDMI function. For more
information see the operating instructions for
each component.
1 Press , then press
HOME
MENU
.
2 Select ‘
System Setup
’, then press
ENTER
.
3 Select ‘
Other Setup
’, then press
ENTER
.
4 Select ‘
HDMI Setup
’, then press
ENTER
.
5 Select the ‘
Control
’ setting you want.
Choose whether to set this unit’s Control with
HDMI function ON or OFF. You will need to set
it to ON to use the Control with HDMI
function.
When using a component that does not
support the Control with HDMI function, set
this to OFF.
ON – Enables the Control with HDMI
function. When this unit’s power is turned
off and you have a supported source begin
playback while using the Control with
HDMI function, the audio and video
outputs from the HDMI connection are
output from the TV.
OFF – The Control with HDMI is disabled.
Synchronized operations cannot be used.
When this unit’s power is turned off, audio
and video of sources connected via HDMI
are not output.
6 Select the ‘
Control Mode
’ setting you
want.
Choose whether you want to enable HDMI for
all linked functions or the PQLS function only.
However, Display Power Off will activate the
settings set forth in step 7 below.
ALL – Enabled for all linked functions.
PQLS Enabled only for the PQLS function.
When PQLS is selected, link functions
other than the PQLS function may not work
properly. If you wish to use all link
functions, select ALL.
7 Select the ‘
Display Power Off
’ setting
you want.
If the TV’s power is turned off while using the
Control with HDMI function, the receiver’s
power is also turned off (all power off function).
This function can be disabled.
YES – The all power off function is enabled.
The receiver’s power turns off together with
the TV’s power.
This function only works when the input for
a component connected to the receiver by
Control with HDMI is selected or when
watching the TV.
NO – The all power off function is disabled.
The receiver’s power is not affected when
the TV’s power is turned off.
8 When you’re finished, press
HOME MENU
.
You will return to the Home Menu.
RECEIVER
2. Volume Setup
3.
Remote Control Mode Setup
4.
Flicker Reduction Setup
5. Pairing Bluetooth Device
1. HDMI Setup
4e.Other Setup
A/V RECEIVER
Exit Return
4e1.HDMI Setup
A/V RECEIVER
Exit Finish
Control : ON
Control mode : ALL
Display Power Off : YES
VSX-31_30_UC.book 68 ページ 2010年8月25日 水曜日 午前9時28分
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-30 in the language / languages: English as an attachment in your email.

The manual is 8,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info