699669
57
Zoom out
Zoom in
Previous page
1/64
Next page
57
En
08
Others
Problem Check Remedy
Power does not turn on. Is the power cord
properly connected?
• Plug the power cord securely into the power outlet (page 22).
• Unplug the power cord, wait several seconds, then plug the
power cord back in.
The player’s power turns
off automatically.
Is Auto Power Off set to 15
min or 30 min?
If Auto Power Off is set to 15 min or 30 min, the player’s power
automatically turns off if no operation is performed for the set
amount of time (page 43).
Is Control set to On? The player’s power may turn off together with the power of
the TV connected to the HDMI OUT terminal. If you do not want
the player’s power to turn off when the TV’s power is turned
off, set Control to Off (page 41).
The player’s power turns
on automatically.
Is Control set to On? The player’s power may turn on together with the power of the
TV connected to the HDMI OUT terminal. If you do not want the
player’s power to turn on when the TV’s power is turned on, set
Control to Off (page 41).
This unit cannot be
operated.
• Use within the specified usage temperature range (page 61).
• If the power cannot be turned off (to standby), reset the unit.
Press and hold the ^ STANDBY/ON button for approx. five
seconds. When the button indicator turns off, release your
finger.The unit restarts and can now be operated.
The player cannot be
operated with the remote
control.
Are you operating the
remote control from a
point too far away from
the player?
Operate from within 7 m of the remote control sensor.
Are the batteries dead? Replace the batteries (page 5).
Unit heats up during use. Depending on the usage environment, the temperature of the
unit's cabinet may increase somewhat during use, but this is
not a malfunction and there is no need to worry.
Input of the connected TV
and AV system switches
automatically.
Is Control set to On?
The input of the TV and AV system (AV receiver or amplifier, etc.)
connected to the
HDMI OUT
terminal may automatically switch to
the player when playback starts on the player or the menu screen
(
Source
function, etc.) is displayed. If you do not want the inputs
of the connected TV and AV system (AV receiver or amplifier,
etc.) to switch automatically, set
Control
to
Off
(page 41).
Settings I have made have
been cleared.
• Have you disconnected
the power cord while the
player’s power was on?
• Has there been a power
failure?
Always press ^ STANDBY/ON on the player’s front panel or
^ STANDBY/ON on the remote control and check that POWER
OFF has turned off from the player’s front panel display before
disconnecting the power cord. Be particularly careful when the
power cord is connected to the AC outlet on another device
because the player turns off in conjunction with the device.
USB (external storage)
device does not work
with this player properly.
Is the USB device
properly connected?
• Turn the player’s power off, then turn the power back on.
• Turn the player’s power off, then reconnect the external
storage device (page 21).
Is the USB device
connected via an
extension cable?
Do not use an extension cable. The player may not work
properly with it.
Is the external storage
device connected to the
USB port via a memory
card reader or USB hub?
External storage device may not work if connected to the USB
port via a memory card reader or USB hub.
Does the external storage
device contain multiple
partitions?
External storage devices may not be recognized if they
contain multiple partitions.
Is the external storage
device write-protected?
Turn the player’s power off, then disable the write-protection.
Is the USB device’s file
system FAT16 or FAT32?
USB devices formatted in the FAT16 or FAT32 file system can
be used.
Some external storage devices may not operate.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer UDP-LX800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer UDP-LX800 in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer UDP-LX800

Pioneer UDP-LX800 User Manual - German, Dutch - 184 pages

Pioneer UDP-LX800 User Manual - French, Italian - 184 pages

Pioneer UDP-LX800 User Manual - Swedish - 184 pages

Pioneer UDP-LX800 User Manual - Spanish - 184 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info