790138
6
Zoom out
Zoom in
Previous page
1/12
Next page
AUTOMATIC AIMD MANUAL TUNING
Check that all terminals are properly connected
before switching on the unit.
Before starting to use the unit, turn the FUNCTION
switches on the stereo amplifier to TUNER.
AUTO SEARCH TUNING
The electronic tuning circuit inside the unit will search-
for your desired station automatically.
Tur-jirsjo
f
Caution with Auto-Search:
Since this is a highly sensitive mechanism, the frequen-
cy Auto-Search operation may stop even with weak
foreign broadcasts, particularly at night. Also, frequen-
cy noise in large cities may cause the search operation
to stop.
When using Auto-Search to preset AM stations, if the
frequency search operation stops too frequently,
changing the position of the AM loop antenna may be
of help in reducing its sensitivity so that only powerful,
nearby stations are received. After tuning in the station,
be sure to reposition the antenna to its best position for
reception.
For very weak stations, use the manual tuning mode to
preset stations.
MANUAL TUNING
This tuning method is used in the following cases:
When presetting each frequency corresponding to
the desired station using the STATION CALL
switch.
(For details on the presetting memory, see
page 7.)
When tuning in to a station irrespective of the
preset stations reception area, perform tuning
manually using the following procedure.
1 Turn on the POWER of the unit and
the stereo amplifier.
2 Select your desired broadcasting
band using the FUNCTION switch-
es.
3. Press the MANUAL/AUTO selector
so that the AUTO indicator lights.
4.
Press the FREQUENCY/CHANNEL
selector so that the CHANNEL in-
dicator goes out.
5. Press the " + " or "-" TUNING
switch.
By simply pressing the tuning switch, the receiver will
automatically search for a station and tune in to it. By
pressing " + ", the frequency will move upwards, and
by pressing the frequency will move downwards.
Each time the switch is pressed, the next higher (or
lower) frequency station will be tuned in.
NOTE:
When the AUTO SEARCH is in use, reception may not be
possible over long distances or when signa/s are
weal<.
At
these times
manua/
tuning is
recommended.
3
/AUTO
TUNIfMIG
1
t
1
4 5
1 Turn on the POWER of the unit and
the stereo amplifier.
2 Select your desired broadcasting
band using the FUNCTION switch-
es.
3. Press the MANUAL/AUTO selector
so that the AUTO indicator goes
out.
4.
Press the FREQUENCY/CHANNEL
selector so that the CHANNEL in-
dicator goes out.
5. Use the TUNING switches "-" or
" to locate the frequency of
your desired station.
For step-by-step searching, press the TUNING switch
once and release it immediately. For continuous rapid
scanning keep the TUNING switch pressed. The
OPERATION TUNED indicator will light up when the
desired station is tuned in best.
NOTE:
The OPERATION TUNED indicator will not function for
broadcasts received over long distances or
v/hen
signals are
weak.
When an FM broadcast is received in MANUAL
TUNING,
muting will not
operate.
B
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer tx-1060l at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer tx-1060l in the language / languages: English as an attachment in your email.

The manual is 4.88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info