790138
5
Zoom out
Zoom in
Previous page
1/12
Next page
FRONT
PANEL
FACILITIES
Model
TX-1060
\I ^r.J
BAND
r
0
O
O POWER switch
When this switch is set to the on position, power is
supplied to the tuner's main circuits. The unit's
POWER
switch is geared to selecting the
transfornner's secondary and so even at the stand-
by position, the unit's circuitry will worl< as long as
the power cord is connected to a power
outlet.
Disconnect
the power cord
from
the power
outlet
when you do not plan to use the
unit
for a long
period of time.
O FM
STEREO
indicator
This
lights when a stereo program has been picked
up during an FM broadcast.
O TUNED indicator
This
lights up to indicate when finest
tuning
of a
sta-
tion
has been achieved.
O
FREQUENCY/CHANNEL
display
This
shows the frequency of the station currently be-
ing received in
digital
form.The FM band is indicated
by MHz, and the AM (LW, MW) band by kHz.
The
channel number of the
STATION
CALL
switch
is
displayed
also.
O IVIEMORY switch
This
is used to memorize stations. When the switch
is
depressed, the MEMORY indicator will
light.
To
memorize the frequency of any station, press the
STATION
CALL
switch while the MEMORY in-
dicator is
lighting
up.
O TUNING switches (-, +)
These
are used to locate stations.
Push
the
left
half
of this switch "-" to locate a station broadcasting on
a
lower frequency and the
right
half of this switch
"
-I-"
to locate a station broadcasting on a higher fre-
quency.
O MANUAL/AUTO selector
Use
this switch in combination
with
the
FREQUEN-
CY/CHANNEL
selector when changing the
tuning
method.
AUTO
SEARCH
TUNING, MANUAL TUNING
AUTO
INDEX
CHANNEL
SCAN,
.MANUAL
INDEX
CHANNELSCAN
When this selector is pressed so that the AUTO in-
dicator lights, the AUTO mode will be activated. For
details,
see pages 6 and 7.
O
FREQUENCY/CHANNEL
selector
Use
this selector together
with
the MANUAL/AUTO
selector
of O when changing the
tuning
method.
When it is pressed so that the
CHANNEL
indicator
lights, the
CHANNEL
mode will be activated. For
details,
see pages 6 and 7.
O FUNCTION switches
These
are used to select either the FM, MW or LW
broadcasting bands.
FM:
Push
to receive FM band broadcasts.
MW:
Push
to receive MW band broadcasts.
LW:
Push
to receive LW band broadcasts.
Only AM/FM switching isavailablefor the
TX-1060
model.
O STATION
CALL
switches
These
are used to preset and recall broadcasting
sta-
tions.
O Station mode
SELECT
switch/indicator
Use
this switch to set the station call switches to
either the No.1 mode (1 - 8), orthe No.2 mode (9 -
16).
When the switch is pressed so that the indicator
lights, the No.2 mode (9 16) has been selected.
NOTE:
Merely
setting this switcli
will
cause
no change in tuner
operation.
5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer tx-1060l at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer tx-1060l in the language / languages: English as an attachment in your email.

The manual is 4.88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info