Manual Pioneer SGY-PM910HR (page 2 of 26) (English)

612931

Zoom out

Zoom in

1/26

Table of Contents

Table of Contents ............................................................................................................................................... 2

1 Preparations ................................................................................................................................................... 4

1.1 Confirm the products .............................................................................................................................. 4

1.2 Outline of procedure ............................................................................................................................... 4

1.2.1 For the SGY-PM910HL/HR with an ANT+ cycle computer ........................................................... 4

1.2.2 For the SGY-910H2/(HL+HR) with an ANT+ cycle computer ....................................................... 4

1.2.3 For the SGY-PM910HL/HR/(HL+HR)/H2 with a SGX- CA500 ..................................................... 5

1.3 Product mode .......................................................................................................................................... 6

Pedaling monitor mode: ................................................................................................................................. 6

•Dual power meter mode: ............................................................................................................................. 6

Single power meter mode: ............................................................................................................................. 6

The power value of the left or right sensors can be doubled and displayed quickly and the cadence can be

measured. Can be used with SGX-CA500 or with a Cyclocomputer that supports ANT+ from another

manufacturer ................................................................................................................................................. 6

2 Mode Select .................................................................................................................................................... 6

2.1 Switching to the pedaling monitor mode• ............................................................................................. 6

2.1.1 Press the menu button on the CycloMeter screen of SGX-CA500. ................................................ 6

2.1.2 Tap [Option] - [Pedaling settings] - [Mode Switch] in this order. .................................................. 6

2.1.3 Tap on the device number display part. ......................................................................................... 6

2.1.4 Enter the device number and tap [ ]. .................................................................................... 7

2.1.5 Rotate the bicycle’s crank set more than three rotations to start the left and right transmitters.

2.1.6 Tap [Pedaling Monitor]. .................................................................................................................. 7

2.1.7 Add in the sensor list of SGX-CA500 .............................................................................................. 7

2.2 Switch to dual power meter mode .......................................................................................................... 8

2.2.1 [Method 1] Switch by pushing the push switch in the right transmitter ..................................... 8

2.2.2 [Method 2] Switch the mode on SGX-CA500 ................................................................................ 10

2.3 Switch to single power meter mode ..................................................................................................... 11

2.3.1 [Method 1] Switch by pushing the push switch in the right transmitter ................................... 11

2.3.2 [Method 2] Switch the sensor mode from SGX-CA500 ................................................................ 11

3 Magnet Detection and Calibration .............................................................................................................. 12

3.1 Temporarily affix the Magnet .............................................................................................................. 12

3.1.1 Use masking tape to temporarily attach the Magnet Patch ....................................................... 12

3.1.2 Rotate the rank to confirm the position of the magnets. ............................................................. 12

3.1.3 Temporarily affix the Magnet. ...................................................................................................... 13

3.1.4 Turn the crank slowly. ................................................................................................................... 13

3.2 Magnet Detection (For cycle computer other than Pioneer) ............................................................... 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SGY-PM910HR in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SGY-PM910HR

Pioneer SGY-PM910HR User Manual - English, German, Dutch, French, Italian, Spanish - 234 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer SGY-PM910HR Manual

Product: