Manual Pioneer SC-1224 (page 94 of 126) (English)

611801

Zoom out

Zoom in

1/126

The System Setup and Other Setup menus

The Other Setup menu

The Other Setup menu is where you can make customized settings to reflect how you are using the receiver.

1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and

then press HOME MENU.

A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the

screens and select menu items. Press RETURN to exit the current menu.

2 Select ‘System Setup’ from the HOME MENU.

3 Select ‘Other Setup’, then press ENTER.

4 Select the setting you want to adjust.

If you are doing this for the first time, you may want to adjust these settings in order:

! Auto Power Down – Sets the power to turn off automatically when the receiver is not being used (page 94 ).

! Volume Setup – Sets up the volume-related operations of this receiver (page 94 ).

! Remote Control Mode Setup – Sets this receiver’s remote control mode (page 94 ).

! Software Update – Use to update the receiver’s software and check the version (page 95 ).

! ZONE Setup – Use to make the sub zone-related settings (page 95 ).

! On Screen Display Setup – Sets whether or not to display the status on the display when the receiver is oper-

ated (page 96 ).

! Play ZONE Setup – Select the zone for playing the audio contents of devices in the home network (page 96 ).

! Maintenance Mode – This is used to receive maintenance from a Pioneer service engineer or custom

installer (page 96 ).

5 Make the adjustments necessary for each setting, pressing RETURN to confirm after each

screen.

Auto Power Down

Important

ZONE 3 is a function for SC-2024 only. It cannot be selected or set with SC-1224.

The power can be set to turn off automatically if no operation has been performed for a specific amount of time with

no audio or video signals being input to the receiver. When using ZONE 2, ZONE 3 or HDZONE, the ZONE 2, ZONE 3

or HDZONE power can also be set to turn off, but for ZONE 2, ZONE 3 or HDZONE the power turns off automatically

after the amount of time set here even if signals are being input or operations have been performed.

Different times can be set for the main zone, ZONE 2, ZONE 3 and HDZONE.

1 Select ‘Auto Power Down’ from the Other Setup menu.

2 Select the zone you want to set and set the time after which the power turns off.

! MAIN – The time can be selected from among “15 min”, “30 min”, “60 min” and “OFF”. The power turns off

after there has been no signal and no operation for the selected time.

! ZONE 2 – The time can be selected from among “30 min”, “1 hour”, “3 hours”, “6 hours”, “9 hours” and

“OFF”. The power turns off after the selected time.

! ZONE 3 – The time can be selected from among “30 min”, “1 hour”, “3 hours”, “6 hours”, “9 hours” and

“OFF”. The power turns off after the selected time.

! HDZONE – The time can be selected from among “30 min”, “1 hour”, “3 hours”, “6 hours”, “9 hours” and

“OFF”. The power turns off after the selected time.

Note

Depending on the connected devices, the Auto Power Down function may not work properly due to excessive

noise or other reasons.

Volume Setup

You can set the maximum volume of this receiver or specify what the volume level will be when the power is

turned on.

1 Select ‘Volume Setup’ from the Other Setup menu.

2 Select the Power ON Level setting you want.

The volume can be set so that it is always set to the same level when the receiver’s power is turned on.

! LAST (default) – When the power is turned on, the volume is set to the same level as when the power was last

turned off.

! “---” – When the power is turned on, the volume is set to minimum level.

! –80.0dB to +12.0dB – Specify the volume to be set when the power is turned on, in steps of 0.5 dB.

It is not possible to set a volume level greater than the value specified at Volume Limit setup (see below).

3 Select the Volume Limit setting you want.

Use this function to limit the maximum volume. The volume cannot be increased above the level set here, even by

operating VOLUME button (or the dial on the front panel).

! OFF (default) – The maximum volume is not limited.

! –20.0dB/–15.0dB/–10.0dB/–5.0dB/0.0dB – The maximum volume is limited to the value set here.

4 Select the Mute Level setting you want.

This sets how much the volume is to be turned down when MUTE is pressed.

! FULL (default) – No sound.

! –40.0dB/–20.0dB – The volume will be turned down to the level specified here.

5 When you’re finished, press RETURN.

You will return to the Other Setup menu.

Remote Control Mode Setup

! Default setting: 1

This sets this receiver’s remote control mode to prevent erroneous operation when multiple units of the receiver

are being used.

1 Select ‘Remote Control Mode Setup’ from the Other Setup menu.

2 Select the Remote Control Mode setting you want.

3 Select ‘OK’ to change the remote control mode.

4 Follow the instructions on the screen to change the remote control’s setting.

See Operating multiple receivers on page 77 .

5 When you’re finished, press RETURN.

You will return to the Other Setup menu.

I have an SC 1224 receiver. I have a couple of Sonos wifi speakers. I have a mesh wifi setup in my home from my internet connection. I would like to play music from the receiver over wifi to my speakers in other parts of the house. I.e. my music is on my phone, I connect my phone to the receiver via Bluetooth, the receiver will output to the speakers wired to it in the same room, a basic setup. Now if I want to extend that music to my wireless speakers in other parts of the house too far away for Bluetooth to reach, I should be able to use my home wifi network, but how do I get the receiver to 'talk' to my home wifi network so that it can pass a signal to my wireless speakers? Submitted on 16-6-2023 at 06:39
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SC-1224 in the language / languages: English as an attachment in your email.

The manual is 7,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SC-1224

Pioneer SC-1224 Quick start guide - English, German - 76 pages

Pioneer SC-1224 User Manual - German - 133 pages

Pioneer SC-1224 Quick start guide - Dutch - 76 pages

Pioneer SC-1224 User Manual - Dutch - 130 pages

Pioneer SC-1224 Quick start guide - French - 76 pages

Pioneer SC-1224 User Manual - French - 129 pages

Pioneer SC-1224 Quick start guide - Italian, Spanish - 76 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer SC-1224 Manual

Product: