57845

Pioneer PDP-4280XA Manual

36
Zoom out
Zoom in
Previous page
1/362
Next page
Useful adjustment settings09
36
En
Adjusting image positions and clock
automatically (PC source only)
Use Auto Setup to automatically adjust the positions and clock of
images coming from a personal computer.
1 Press HOME MENU.
2 Select “Option”
(/
then ENTER).
3 Select “Auto Setup”
(/
then ENTER).
A message screen appears and Auto Setup starts.
4 Press HOME MENU to exit the menu.
Note
• When Auto Setup is finished, “Auto Setup completed.” appears.
• Even when “Auto Setup completed.” appears, Auto Setup may
have failed, depending on conditions.
• Auto Setup may fail with a PC image composed of similar
patterns or monochrome. If not successful, change the PC
image and try again.
• Be sure to connect the computer to the plasma television and
switch it on before starting Auto Setup.
• This function is not selectable when the PC is connected to the
HDMI terminal.
Adjusting image positions and clock
manually (PC source only)
Usually you can easily adjust the positions and clock of images
using Auto Setup. Use Manual Setup to optimize the positions and
clock of images when necessary.
1 Press HOME MENU.
2 Select “Option”
(/
then ENTER).
3 Select “Manual Setup”
(/
then ENTER).
4 Select the item to be adjusted
(/
then ENTER).
5 Perform adjustment
(/
and
/
).
With “Clock” or “Phase” selected, you can perform adjustment in
the parameter using /.
6 Press HOME MENU to exit the menu.
Note
• To restore the factory defaults for all the items, press
/
to select
“Reset” in step 4, and then press ENTER. A confirmation screen
appears. Press
/
to select “Yes”, and then press ENTER.
• This function is not selectable when the PC is connected to the
HDMI terminal.
Selecting an input signal type
After connecting to the INPUT 1, INPUT 2, or INPUT 3 terminal,
specify the type of video signals to be received from the connected
equipment. For the type of the signals, see the operation manual
that came with the connected equipment.
Before starting the menu, press INPUT 1, INPUT 2, or INPUT 3 on
the remote control unit or press INPUT on the plasma television to
select an input source.
1 Press HOME MENU.
2 Select “Option“ (
/
then ENTER).
3 Select “Input Select“ (
/
then ENTER).
4 Select “Input” or “Audio Select” (
/
then ENTER).
5 Select a signal type (
/
then ENTER).
You can select the video input terminal for “Input”:
• For “INPUT 1”, you can select “Video” or “RGB”.
• For “INPUT 2”, you can select “Video”, “S-Video” or
“COMPONENT”.
• For “INPUT 3”, you can select “Video”, “S-Video”, or “RGB”.
You can select the audio input terminal for “Audio Select”:
• Select “SCART” or “RCA”.
6 Press HOME MENU to exit the menu.
Note
• INPUT 1 or INPUT 3 is selectable only when “Disable” is selected
in the “Setting” for “HDMI Input”.
• You can select the signal in each input terminal.
• The “Audio Select” is only available when “COMPONENT” is
selected in “Input” for “Input Select”.
• If no image appears or images appear in inappropriate colours,
specify another video signal type.
• For the signal types to be specified, check the operation manual
that came with the connected equipment.
Colour system setting
If an image does not appear clearly, select another colour system
(e.g., PAL, NTSC).
1 Press HOME MENU.
2 Select “Option“ (
/
then ENTER).
3 Select “Colour System“ (
/
then ENTER).
4 Select a video signal system (
/
then ENTER).
• You can select “Auto”, “PAL”, “SECAM”, “NTSC”, or “4.43NTSC”.
• With “Auto” selected, input signals are automatically identified.
5 Press HOME MENU to exit the menu.
Note
• The factory default is “Auto”.
• You do not need to enter any setting if “HDMI Input” has been
selected.
• You need to perform colour system setting for each of “INPUT
1”, “INPUT 2”, “INPUT 3” and “INPUT 5”.
• For the colour system setting, see steps 11 and 12 under Setting
up analogue TV channels manually on page 24.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer PDP-4280XA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer PDP-4280XA in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 17,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info