Manual Pioneer PDP-4280XA (page 34 of 362) (English, German, Dutch, French, Italian, Spanish)

57845

Zoom out

Zoom in

1/362

Setting up08

5 Press HOME MENU to exit the menu.

Note

• When you change the Energy Save mode, you may notice a

change in the panel sound. This is normal.

• The Energy Save function can maintain efficiency of the screen

for a long period of time. Setting the Energy Save function to

“Mode 1” is recommended in order to maintain the efficiency of

the screen for a long period of time.

No Signal off (AV source only)

The system will be automatically placed into the standby mode if no

signal is received for 15 minutes.

1 Press HOME MENU.

2 Select “Power Control” (

/

then ENTER).

3 Select “No Signal off” (

/

then ENTER).

4 Select “Enable” (

/

then ENTER).

5 Press HOME MENU to exit the menu.

Note

• Five minutes before the system is placed into the standby mode,

a message appears every minute.

• The system may not be placed into the standby mode when

noise signals are present at the plasma television after a TV

programme finishes.

No Operation off (AV source only)

The system will be automatically placed into the standby mode

when no operation is performed for three hours.

1 Press HOME MENU.

2 Select “Power Control” (

/

then ENTER).

3 Select “No Operation off” (

/

then ENTER).

4 Select “Enable” (

/

then ENTER).

5 Press HOME MENU to exit the menu.

Note

• Five minutes before the system is placed into the standby mode,

a message appears every minute.

Power Management (PC source only)

The system will be automatically placed into the standby mode

when no signal is received from the personal computer.

1 Press HOME MENU.

2 Select “Power Control”

(/

then ENTER).

3 Select “Power Management”

(/

then ENTER).

4 Select “Mode 1” or “Mode 2”

(/

then ENTER).

5 Press HOME MENU to exit the menu.

Note

• This function is not selectable when the PC is connected to the

HDMI terminal.

Energy Save

Selections Off Does not decrease the picture

brightness

Mode 1 Slightly lowers power consumption

while slightly suppressing the

brightness drop level

Mode 2 Decreases the picture brightness

and lowers power consumption

Picture Off Deactivates the screen to save

power. To restore the screen

display, press any button other

than i +/i – and e.

This setting is not memorized by

the system.

No Signal Off

Selections Disable

(default)

Does not place the system into the

standby mode

Enable Places the system into the standby

mode if no signal is received for 15

minutes

No Operation off

Selections Disable

(default)

Does not place the system into the

standby mode

Enable Places the system into the standby

mode if no operation is performed

for three hours

Item Description

Off (default) No power management

Mode 1 · Places the system into the standby mode when

no signal is received from the personal computer

for eight minutes.

· Even when you start using the computer and a

signal is received again, the system stays off.

· The system is switched on again by pressing

STANDBY/ON on the plasma television or a on

the remote control unit.

Mode 2 · Places the system into the standby mode when

no signal is received from the personal computer

for eight seconds.

· When you start using the computer and a signal

is input again, the system is switched on.

· The system is switched on again by pressing

STANDBY/ON on the plasma television or a on

the remote control unit.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer PDP-4280XA in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 17,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer PDP-4280XA Manual

Product: