611810
33
Zoom out
Zoom in
Previous page
1/54
Next page
33
Additional information (Network audio player: N-P01)
13
8
8
Cannot access to the component or computer connected
via network.
Internet security software is currently installed in the
connected component. There are cases where a component
with Internet security software installed cannot be accessed.
The audio component on the network which has been
switched off is switched on. Switch on the audio component
on the network before switching on this player.
The component connected to the network is not properly set. If
the client is automatically authorized, you need to enter the
corresponding information again. Check whether the
connection status is set to “Do not authorize”.
There are no playable audio files on the component connected
to the network. Check the audio files stored on the component
connected to the network.
Wireless Accessory Configuration fails.
If the iOS device is not connected via Wi-Fi, connect the iOS
device via Wi-Fi.
If the iOS device and router are connected via 5 GHz, change
the connection between the iOS device and router to 2.4 GHz,
or use a different setting method.
Playback does not start.
The component is currently disconnected from this player or
the power supply. Check whether the component is properly
connected to this player or the power supply.
The computer or Internet Radio is not properly operated.
The corresponding IP address is not properly set. Switch on the
built-in DHCP server function of your router, or set up the
network manually according to your network environment
(page 12).
The IP address is being automatically configured.
The automatic configuration process takes time. Please wait.
The audio files stored on components on the network, such
as a computer, cannot be played back.
Windows Media Player 11 or Windows Media Player 12 is not
currently installed on your computer. Install Windows Media
Player 11 or Windows Media Player 12 on your computer
(page 29).
Audio files were not recorded in a format playable on this
player. Check whether the audio files were recorded in a format
supported by this player (page 38).
Audio files recorded in MPEG-4 AAC or FLAC are being played
back on Windows Media Player 11 or Windows Media Player
12. Audio files recorded in MPEG-4 AAC or FLAC cannot be
played back on Windows Media Player 11 or Windows Media
Player 12. Try using another server. Refer to the operation
manual supplied with your server.
The component connected to the network is not properly
operated. Check whether the component is affected by special
circumstances or is in the sleep mode. Try rebooting the
component if necessary.
The component connected to the network does not permit file
sharing. Try changing the settings for the component
connected to the network.
The folder stored on the component connected to the network
has been deleted or damaged. Check the folder stored on the
component connected to the network.
Network connections could be restricted due to the
computer’s network settings, security settings, etc. Check the
computer’s network settings, security settings, etc.
Input of a password is requested when starting AirPlay.
Enter the AirPlay password set during Wireless Accessory
Configuration or Network Setting.
If you have forgotten the password, it is possible to reset it.
Cannot access Windows Media Player 11 or Windows
Media Player 12.
In case of Windows Media Player 11: You are currently logged
onto the domain through your computer with Windows XP or
Windows Vista installed. In case of Windows Media Player 12:
You are currently logged onto the domain through your
computer with Windows 7 or 8 installed. Instead of logging
onto the domain, log onto the local machine.
Audio playback is undesirably stopped or disturbed.
The audio file currently being played back was not recorded in
a format playable on this player. Check whether the audio file
was recorded in a format supported by this player. Check
whether the folder has been damaged or corrupted. Even audio
files listed as playable on this player may sometimes not be
played back or displayed (page 38).
The LAN cable is currently disconnected. Connect the LAN
cable properly (page 12).
There is heavy traffic on the network with the Internet being
accessed on the same network. Use 100BASE-TX to access the
components on the network.
When in the DMR mode, depending on the external controller
being used, playback may be interrupted when a volume
operation is performed from the controller. In this case, adjust
the volume from the player or remote control.
There is a connection routed through a wireless LAN on the
same network. There may be a shortage of bandwidth on the
2.4 GHz band used by the wireless LAN. Make wired LAN
connections not routed through a wireless LAN. Install away
from any devices emitting electromagnetic waves on the 2.4
GHz band (microwave ovens, game consoles, etc.). If this does
not solve the problem, stop using other devices that emit
electromagnetic waves.
Cannot listen to Internet Radio stations.
The firewall settings for components on the network are
currently in operation. Check the firewall settings for
components on the network.
You are currently disconnected from the Internet. Check the
connection settings for components on the network, and
consult with your network service provider if necessary
(page 12).
The broadcasts from an Internet Radio station are stopped or
interrupted. Some Internet radio stations on the list of Internet
Radio stations for this player (page 27) may occasionally not be
available for listening.
The player only supports broadcast stations that use HTTP. It
may therefore be unable to playback certain broadcast
stations.
Cannot pause at Music Server/DMR.
For some DLNA server software/NAS, or file formats being
played, you many not be able to pause. Please contact the
DLNA server software manufacturer or NAS manufacturer that
you are using.
Music Server (DLNA) album names and artist names are not
displayed.
Metadata such as album names and artist names have to be
approved by the server and distributed to the player, which
depends on the NAS you are using and the specs of DLNA
server software.
Supported files differ depending on NAS and DLNA server
software. For more details, please contact the NAS
manufacturer or DLNA server software manufacturer.
Music Server (DLNA) album art is either displayed or not
displayed.
In the case of the Music Server, this depends upon the specs of
DLNA server software. Supported files differ depending on
DLNA server software. For more details, please contact the
DLNA server software manufacturer.
This unit cannot be selected from the Spotify application.
An Internet connection is required for both the mobile digital
device and this unit.
Connect the mobile digital device by Wi-Fi to the wireless LAN
router of the same network as the one to which this unit is
connected.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer N-P01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer N-P01 in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer N-P01

Pioneer N-P01 Quick start guide - English, German - 36 pages

Pioneer N-P01 User Manual - German - 54 pages

Pioneer N-P01 Quick start guide - Dutch - 36 pages

Pioneer N-P01 User Manual - Dutch - 54 pages

Pioneer N-P01 Quick start guide - French - 36 pages

Pioneer N-P01 User Manual - French - 54 pages

Pioneer N-P01 Quick start guide - Italian, Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info