573879
50
Zoom out
Zoom in
Previous page
1/126
Next page
Additional information14
50
En
Chapter 14
Additional information
Optional system settings
See the notes in each section for more
information about the settings. The first setting
in each section is the default.
1 Press
SHIFT+SETUP
and use
/
to
select
SYS SET
then press
ENTER
.
2Use
/
then
ENTER
to choose the
setting you want to adjust.
The available settings are shown in the front
panel display.
1
3Use
/
to adjust then press
ENTER
to
confirm and exit.
Dimming the display
You can adjust the brightness of the text in the
front panel display.
LIGHT – Brighter setting
DARK – Darker setting
Key lock setting
LOCK ON – Makes the front panel buttons
and controls inoperative.
LOCK OFF – Restores regular use of the
front panel buttons and controls.
Frequency step setting
Not applicable to Saudi Arabia, Israel, South
Africa, other middle eastern contries and duty
free models
If you find that you can’t tune into stations
successfully, the frequency step may not be
suitable for your country/region.
•AM 9K
•AM 10K
TV system setting
The default setting of this system is AUTO, and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to AUTO. If you find picture distortion with
some discs, set the TV system to match your
country or region’s system. However, this may
restrict the kinds of disc you can watch. See
the table for the kinds of discs compatible with
each setting (AUTO, PAL and NTSC).
2
After using
/
to choose
TV SYS
(step
3
above), press
ENTER
to change the TV
system as follows:
AUTO NTSC
NTSC PAL
PAL AUTO
Press ENTER while CHANGE is blinking.
The system will automatically enter standby
mode, then turn on again. You’ll see the new TV
system setting in the display after seeing
POWER ON.
Note
1 The setup menu is exited automatically after 5 minutes of inactivity.
2 Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch
vertical amplitude, resulting in a display without vertical shrinkage. However, in some cases, the image may appear without
color. If your PAL TV does not have a V-Hold control, you may not be able to watch NTSC discs because of picture roll. If the TV
has a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands
at the top and bottom of the screen.
Player setting
Media Type
Format NTSC PAL AUTO
DVD/Super VCD/
Video CD/DivX
Video/WMV
NTSC
NTSC PAL NTSC
PAL
NTSC PAL PAL
CD/MP3/WMV/
MPEG-4 AAC/
JPEG/no disc
NTSC PAL NTSC or
PAL
HTZ585DVD_EN.book 50 ページ 2009年3月19日 木曜日 午後6時35分
Downloaded from www.Manualslib.com manuals search engine
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer HTZ-FS30DVD-AP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer HTZ-FS30DVD-AP in the language / languages: English as an attachment in your email.

The manual is 8,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info