573879
49
Zoom out
Zoom in
Previous page
1/126
Next page
KURO LINK 13
49
En
English
FrançaisDeutsch
Nederlands
Italiano Español
Setting the KURO LINK mode
Choose whether to set this unit’s KURO LINK
function ON or OFF. You will need to set it to
LINK ON to use the KURO LINK function.
When using a TV that does not support the
KURO LINK function, set this to LINK OFF.
1 Press
SHIFT+SETUP
.
2Use
/
to select
HDMI SET
then press
ENTER
.
3 Use
/
to select
KURO LINK
, then
press
ENTER
.
4 Use
/
to select the setting then press
ENTER
to confirm.
LINK ON – Enables the KURO LINK
function.
LINK OFF – The KURO LINK is disabled.
Synchronized operations cannot be used.
Before using synchronization
Once you have finished all connections and
settings, you must:
1 Put all components into standby mode.
2 Turn the power ON for all components,
with the power for the flat screen TV being
turned on last.
3 Choose DVD/CD and see if video output
displays properly on the screen or not.
Synchronized amp mode
The synchronized amp mode can be set from
the KURO LINK-compatible TV’s remote
control. See the explanation below for
operations in the synchronized amp mode.
These functions are set from the TV’s menu
screen. For more information, refer to the
operating instructions of the KURO LINK-
compatible TV.
Synchronized amp mode operations
When using the synchronized amp mode, the
KURO LINK-compatible component
connected to this unit operates in sync as
described below.
The unit’s volume can be set and the sound
can be muted using the TV’s remote control.
When the TV’s power is set to standby, the
unit’s power is also set to standby. (The
unit’s power is automatically turned off
when the TV’s power is turned off while a
video DVD is being played on the unit.
However, the unit’s power may not turn off
automatically in some cases, for example,
if you are listening to a CD or radio and turn
off the output device.)
The unit’s input switches automatically
when the TV’s channel is switched.
The synchronized amp mode remains in
effect even if the unit’s input is switched to
a function other than the DVD/CD.
The operations below can also be used on
Pioneer KURO LINK-compatible flat screen
TVs.
When the unit’s volume is adjusted or the
sound is muted, the volume status is
displayed on the flat screen TV’s screen.
When the OSD language is switched on
the flat screen TV, the unit’s language
setting also switches accordingly.
Canceling synchronized amp mode
When the synchronized amp mode is
canceled, the unit’s power turns off if you
were viewing a TV program on the TV.
When in the synchronized amp mode, the
synchronized amp mode is canceled when
the unit’s power is turned off. To turn the
synchronized amp mode back on, select
the synchronized amp mode using the TV’s
remote control.
When in the synchronized amp mode, the
synchronized amp mode is canceled if an
operation that produces sound from the TV is
performed from the TV’s menu screen, etc.
HTZ585DVD_EN.book 49 ページ 2009年3月19日 木曜日 午後6時35分
Downloaded from www.Manualslib.com manuals search engine
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer HTZ-FS30DVD-AP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer HTZ-FS30DVD-AP in the language / languages: English as an attachment in your email.

The manual is 8,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info