573849
22
Zoom out
Zoom in
Previous page
1/62
Next page
Surround sound settings
07
22
En
3 Use
/
(cursor up/down) to select a setting.
Select one of the following:
DRC OFF
(default)
– No dynamic range adjustment
(use when listening at higher volume)
DRC MID
– Mid setting
DRC HIGH
– Dynamic range is reduced (loud sounds
are reduced in volume while quieter sounds are
increased)
4 Press
ENTER
to exit.
Dual mono setting
Specifies how dual mono encoded Dolby Digital or DTS
soundtracks should be played. You can also use this
setting to switch the audio channel on DVD-RW discs
recorded with bilingual audio.
1 Press
SETUP
.
2 Use the
/
(cursor left/right) buttons to select
DUALMONO, then press
ENTER
.
3 Use
/
(cursor up/down) to select a setting.
Select one of the following:
CH1 MONO
(default)
– Only channel 1 is played
CH2 MONO
– Only channel 2 is played
CH1/CH2
– Both channels are played through the
front speakers
4 Press
ENTER
to exit.
Adjusting the channel levels using the
test tone
If you prefer, you can set the channel levels using a test
tone as a reference, rather than playing a source (see
Channel level setting
on page 21). A test tone is played
through each speaker in turn, allowing you to adjust the
level as it plays.
Note that the channel level settings for stereo sources
are independent of the settings for surround sound
sources.
1 Press
SURROUND
to select the Auto listening
mode.
If you want to set the channel levels for stereo (two
channel) playback, select the
STEREO
listening
mode.
2 Press
TEST TONE
.
The test tone is output from each speaker in turn.
3While a test tone is playing, use the
/
(cursor
up/down) buttons to adjust that channel level.
The aim is to adjust the levels so that you hear the test
tone at the same volume from each speaker. You can
adjust the level of each channel by ±10 dB.
You can adjust the overall volume of test tone output
using the
VOLUME
+/–
buttons (this does not affect
the channel level settings).
If the system is in Stereo or Virtual mode, you will not
be able to adjust the center or surround channels.
Because of the ultra low frequencies the subwoofer
produces, it may sound quieter than it really is. We
suggest adjusting the subwoofer level while listening
to a source. See the method described in
Channel
level setting
on page 21.
4When you’re done, press
ENTER
to exit test tone
setup.
If you use the Auto MCACC feature again, it will
overwrite the settings you have made here.
ST
TUNE
TUNE
ST
ENTER
ENTER
CLEAR
SOUND
SETUP
TEST
TONE
CHANNEL
SOUND
RETRIEVER
MCACCADVANCED F.S.SURRSURROUND
SLEEP
VOLUME
SR
ST
TUNE
TUNE
ENTER
TEST
TONE
SURROUND
HTP-330.book 22 ページ 2007年3月27日 火曜日 午後6時8分
Downloaded from www.Manualslib.com manuals search engine
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer HTP-330 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer HTP-330 in the language / languages: English as an attachment in your email.

The manual is 3,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info