699603
22
Zoom out
Zoom in
Previous page
1/267
Next page
- 22 -
English
1 Press SRC/OFF to select [APP].
You can also make various adjustments in the AUDIO settings (page 26).
This unit features two operation modes: network mode and standard mode. You can
switch between modes as desired (page 6).
Network mode
You can create a 2-way + SW multi-amp and multi-speaker system with high range
speaker, middle range speaker and subwoofer for reproduction of high, middle and low
frequencies (bands).
Standard mode
You can create a 4-speaker system with front and rear speakers or front speakers and
subwoofers, or a 6-speaker system with front and rear speakers and subwoofers.
You can adjust the cut-off frequency value and the slope value of each speaker.
The following speakers can be adjusted.
Network mode:
[HIGH] (high-range speaker HPF), [MID HPF] (middle-range speaker HPF), [MID LPF]
(middle-range speaker LPF), [SUBWOOFER]
Standard mode:
[FRONT], [REAR], [SUBWOOFER]
NOTE
[SUBWOOFER] can only be selected when [ON] is selected in [SUBWOOFER] (page 26).
1 Press the M.C. dial to display the main menu.
2 Turn the M.C. dial to select [AUDIO], then press to confirm.
3 Turn the M.C. dial to select [CROSSOVER], then press to confirm.
Listening to music on your device
Audio Adjustments
Operation modes
Adjusting the cut-off frequency value and the slope
value
22


Need help? Post your question in this forum.

Forumrules
1

Forum

pioneer-fh-s820dab

Reset search

  • I spent the entire weekend cutting my dash to fit the new 2 DIN cage for this radio and having got it perfect, did all the new wiring loom, set the DIP switches for the steering wheel box to keep the can bus happy etc. and then connected the radio prior to insertion. There were no lights on in the electronic box (should have had green to show the can bus was connected and yellow to show all is well) but there were no lights at all, no hiss from the speakers or even a click. Why is this? It's a straightforward swap out of one radio for another and the associated correct wiring all done properly.

    Any helpful suggestions?

    Thanks,
    Paul Submitted on 16-2-2021 at 22:28

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer FH-S820DAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer FH-S820DAB in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 8,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info