I spent the entire weekend cutting my dash to fit the new 2 DIN cage for this radio and having got it perfect, did all the new wiring loom, set the DIP switches for the steering wheel box to keep the can bus happy etc. and then connected the radio prior to insertion. There were no lights on in the electronic box (should have had green to show the can bus was connected and yellow to show all is well) but there were no lights at all, no hiss from the speakers or even a click. Why is this? It's a straightforward swap out of one radio for another and the associated correct wiring all done properly.

Any helpful suggestions?

Thanks,
Paul

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

• First, read the manual;
• Check if your question has been asked previously;
• Try to ask your question as clearly as possible;
• Did you already try to solve the problem? Please mention this;
• Is your problem solved by a visitor then let him/her know in this forum;
• To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
• Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Post your question in this forum.

Info