544415
41
Zoom out
Zoom in
Previous page
1/145
Next page
Recording
41
En
05
As you move the cursor around the grid, an
arrow stretches from the start time to the
current cursor position, representing the
length of the recording. A recording of up to
six hours can be set.
8 Set the end time.
9 Select ‘Yes’ to set the timer
recording and exit, or ‘No’ to go back to
the Easy Timer Recording screen.
You can check the timer recording
details you just set from the main timer
recording screen (see Setting a manual
timer recording on page 42).
Timer recording using the VCR
Plus+ programming system
This system makes programming timer
recordings very simple. Most TV guides
publish PlusCode programming numbers
with their programme details. If you want to
make a timer recording of a programme, you
just input the corresponding code. The date,
start, stop and channel settings are made
automatically. All you have to do is tell the
recorder the recording mode, and whether
it’s a once-only recording or a regular
recording.
1 Press ‘VCR Plus+’ to display the VCR
Plus+ programme screen.
You can also access this screen from the
Home Menu (press HOME MENU, select
Timer Recording, then VCR Plus+).
Use the number buttons to enter the
P
lusCode number. (To clear the last digit
entered, press CLEAR.)
You can also use the ///
buttons to select digits from the on-
screen display.
2 After making the settings, select
‘Enter’ and press ENTER.
The timer recording screen appears with the
timer programme you just set.
3 Confirm that the settings are correct.
If the channel number isn’t displayed, use
the / buttons to highlight CH, then use
the / buttons to set the correct channel
number.
If the channel number is set, but
incorrectly, set up the guide channel
(see VCR Plus+ CH Setting on page 114).
4 Select ‘Store Programme’ to finish.
•Other options in the same menu panel
allow you to name the programme, and
change the recording destination and/or
rec
ording mode.
Checking/editing timer recording
settings
You can check and/or edit the timer
recording settings made by the VCR Plus+
system by selecting Details from the
PlusCode# setting screen.
1 Select ‘Details’ from the
PlusCode# setting screen.
The Timer Programme Set screen appears,
filled out with the timer recording details.
2 Check and edit the fields as
necessary.
See Setting a manual timer recording below
for more on this.
3 Select ‘Store Programme’ to
save the timer programme and exit.
VCR Plus+ programming with the
power off
You can enter a PlusCode programming
number when the recorder is in standby.
ENTER
PlusCode#
1 3
4 5 6
7 8 9
0
Clear Enter
Details
Cancel
2
ENTER
ENTER
DVR660HK_KC_EN.book 41 ページ 2008年2月7日 木曜日 午後2時34分
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer DVR-660H-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer DVR-660H-K in the language / languages: English as an attachment in your email.

The manual is 11,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info