544415
39
Zoom out
Zoom in
Previous page
1/145
Next page
Recording
39
En
05
into standby if no other operation is being
performed.
To cancel the set recor ding time, press
REC.
If you want to pause recording at any
time
1
, press PAUSE. Press again to
restart the recording (If recording to the
HDD, DVD-RAM or DVD-R/-RW (VR
mode), a new chapter is started after
recording r estarts).
6 Press to stop recording.
If you set the recording time in the
previous step, you can still stop the
recording anytime by pressing
F STOP REC.
•Recording will stop automatically when
there is no more space on the HDD/DVD,
or after 12 hours of HDD recording
(whichever is sooner).
About timer recordings
Using the timer recording features you can
program up to 32 timer recordings up to a
month in advance. Timer recording
programmes can be set to record just once,
every day, or every week.
There are three ways to set a timer recording;
using the Easy Timer Recording feature (see
Easy Timer Recording on page 40), using the
VCR Plus+ programming system (see Timer
recording using the VCR Plus+ programming
system on page 41), or using manual timer
recording (see Setting a manual timer
recording on page 42).
You can set the recordi
ng quality for your
timer recording in the same way as for a
regular recording, but with the added option
of an AUTO mode, which maximizes the
recording quality for the space available on
the disc (if recording to DVD), or to fit on to a
blank DVD disc (if recording to the HDD).
You can set timer recordings to record to a
recordable DVD or to the hard disk drive. For
regular (daily or weekly) HDD timer
recordings that you don’t need to keep, you
can use the Auto Replace Recording feature
to automatically replace the previous timer
recording
with the new one. Note that when
you use this feature, the previous recording
made on that timer programme will be
replaced by the next one, regardless of
whether you have watched it yet or not.
You can also set the recorder so that it will
adjust the recording quality to try and fit the
recording on to the disc if it would not
otherwise fit at the recording quality you set
(see Optimized Rec on page 117 for more on
this).
Finally, if you set a timer recording to record
to DVD but there isn’t a recordable DVD
loaded at the time of the recording, the
Recovery Recording feature will
automatically record t
he programme to the
HDD for you.
Important
•A timer recording can’t be set if there are
already 32 timer programmes waiting to
be recorded.
•Timer recording will not start if:
– The recorder is already recording.
– A disc is being initialized, finalized or
unfinalized.
•Timer recording will start when the
operation preventing timer recording
has finished.
When the front panel display is set to
ON, the timer indicator ( ) lights in the
front panel display when
the timer is
active. If the indicator is blinking it
means that (for a DVD timer recording)
there is no disc loaded, or the disc
loaded is not recordable (for an HDD
timer recording it means that the HDD is
not recordable).
Note
1Except during Chase Play.
STOP REC
DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM HDD
DVR660HK_KC_EN.book 39 ページ 2008年2月7日 木曜日 午後2時34分
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer DVR-660H-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer DVR-660H-K in the language / languages: English as an attachment in your email.

The manual is 11,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info