Manual Pioneer DEH-P8400MP (page 52 of 132) (English, Spanish)

97821

Zoom out

Zoom in

1/132

Section

Selecting the illumination color

This product is equipped with two illumination

colors, green and red.

You can select the desired illumination color.

1 Press

OPEN to open the front panel.

2 Press FUNCTION to select ILL.

Press

FUNCTION until ILL appears in the dis-

play.

3 Select the desired illumination color with

2/3.

Pressing 2/3 will switch ILLUMI between red

or green and that status will be displayed (e.g.,

ILLUMI :GRN).

Setting the rear output and sub-

woofer controller

This product’s rear output (rear speaker leads

output and RCA rear output) can be used for

full-range speaker (Rear SP:FULL) or subwoofer

(Rear SP:S.W) connection. If you switch rear

output setting to the Rear SP:S.W, you can con-

nect a rear speaker lead directly to a subwoofer

without using an auxiliary amp.

Initially, the unit is set for rear full-range speaker

connection (Rear SP:FULL).

When rear output are connected to full range

speakers (when Rear SP:FULL is selected), you

can connect the RCA subwoofer output to a

subwoofer. In this case, you can select whether

to use the subwoofer controller’s (low pass

filter, phase) built-in S.W Control:INT or the

auxiliary

S.W Control:EXT.

Notes

• Even if you change this setting, there is no

output unless you switch the non fading out-

put (refer to page 47) or subwoofer output

(refer to page 46) in the Audio Menu on.

• If you change the subwoofer controller, sub-

woofer output and non fading output in the

Audio Menu return to the factory settings.

• Both rear speaker leads output and RCA rear

output are switched simultaneously in this

setting mode.

1 Press

OPEN to open the front panel.

2 Press FUNCTION to select SW.

Press FUNCTION until SW appears in the dis-

play.

3 Change the rear output setting with 5/∞.

Pressing 5/∞ will switch between Rear SP

:FULL (full-range speaker) and Rear SP:S.W

(subwoofer) and that status will be displayed.

Notes

• When no subwoofer is connected to the rear

output, select Rear SP:FULL.

• When a subwoofer is connected to the rear

output, set for subwoofer Rear SP:S.W.

• When the rear output setting is Rear SP:S.W,

you cannot change the subwoofer controller.

4 Change the subwoofer controller with

2/3.

Pressing 2/3 will switch between

S.W Control:INT and S.W Control:EXT and that

status will be displayed.

Initial Settings

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer DEH-P8400MP in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer DEH-P8400MP

Pioneer DEH-P8400MP User Manual - Dutch, Italian - 132 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer DEH-P8400MP Manual

Product: