572157
41
Zoom out
Zoom in
Previous page
1/48
Next page
8 Using the Timer
41
1 Set up the tape deck/MD recorder.
If you're recording to tape:
Load a cassette tape, set the recording direction and reverse mode, and
switch on/off Dolby NR as required.
If you're recording to disc:
Load an MD into the recorder.
2 Set up the tuner/auxiliary component.
If you're recording from the tuner:
Switch to the tuner, and tune into the station (see page 19 for more
detailed instructions on this).
If you're recording from the auxiliary component:
Switch to that component and set it up for playback.
3 Select TIMER REC from the timer menu.
Remember: switch between timer menu options using the $ and
buttons; select the option by pressing SET.
4 Set the recording start time:
First, set the hour:
Use the $ and buttons to change the flashing hour display, then
press
SET.
Next, set the minute:
Use the $ and buttons to change the flashing minute display,
then press
SET.
5 Set the recording end time:
First, set the hour:
Use the $ and buttons to change the flashing hour display, then
press
SET.
Next, set the minute:
Use the $ and buttons to change the flashing minute display,
then press
SET.
6 Select either tape or MD recording:
Use the $ or button to switch between options, then press SET.
TAPE REC - MD REC (only available if an MD recorder is connected)
After pressing
SET, the display shows you the settings you’ve just made,
including the switch on and off times, and the components you’re recording
to and from. The clock and record symbols in the display indicate that the
record timer is set.
Be sure to switch the system into standby mode before timer recording starts. (In standby
mode you can check the timer settings by pressing
TIMER.)
After the recording has finished, the timer recording mode is automatically cancelled.
The on time is whatever was
last set for timer recording
Adjust it to what you want.
Remember: the time is
displayed as a 24-hour clock
The ‘off’ time is automatically
set to an hour later than the
‘on’ time
Adjust it to what you want
The tape deck is set up ready
to record
The tuner is set up ready to be
recorded
Confirm that you’re recording
to tape
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer CT-L77 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer CT-L77 in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info