572157
40
Zoom out
Zoom in
Previous page
1/48
Next page
8 Using the Timer
40
Setting the Sleep Timer
When setting the sleep timer, you only have to tell the system when to switch off.
1 Select SLEEP TIMER from the timer menu.
Remember: switch between timer menu options using the $ and
buttons; select the option by pressing SET.
2 Select a time option:
Use the $ and buttons to switch between options, then press SET.
AUTO plays the current CD, tape or MD out, then switches off the system.
90, 60 and 30 options switch off the system after 90, 60 and 30 minutes,
respectively; OFF cancels the sleep timer if it was previously set.
The little moon indicator lights in the display to show the sleep timer is set and the
display dims. To check how much time is left on the sleep timer, select
SLEEP TIMER
from the timer menu, then press SET. The display shows the remaining time.
Tip
AUTO will not be available if a CD
or MD is playing in repeat mode
(see p.25), or if a tape is playing
in endless mode (see p.33). If you
select
AUTO, then subsequently
start playing something in repeat
or endless mode, the sleep timer
will change automatically to the 90
minute setting.
Setting Up a Future Recording
You can set the timer to record something from either the tuner or a component
connected to the AUX/CD-R inputs. For example, you might want to record a
programme on the radio that is broadcast while you're at work. If you're recording
from an auxiliary component it must also be able to switch on at the time the
recording startsthis system can't control itor you have to leave it switched on
until the recording has finished.
Timer recording works with either the tape deck or the optional MD recorder. During
the actual recording, the volume is automatically set to minimum.
AUX/CD-R SOUND DISPLAY SET MD TAPE TIMER/
CHARACTER
&
CANCEL
REC
$
!
›
+
VOL
STANDBY/ ON
TIMERSET
4
¢
AUX/CD-R SOUND DISPLAY SET MD TAPE TIMER/
CHARACTER
&
CANCEL
REC
$
!
›
+
VOL
STANDBY/ ON
TIMERSET
4
¢
After choosing one of the sleep
options, the display dims
$
SLEEP AUTO
SLEEP 90 - SLEEP 60 - SLEEP 30 - SLEEP OFF
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer CT-L77 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer CT-L77 in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info