454962
95
Zoom out
Zoom in
Previous page
1/142
Next page
93
Chapter 8 Customising the Audio Source SettingAV
2 Touch the desired language.
When you selectOTHER”, a language code
input display is shown. Input the four digit
code of the desired language then touch
ENTER”.
Language code chart for DVD Page 100
If the selected language is not recorded on
the disc, the default language specified on
the disc is output and displayed.
You can also switch the subtitle and audio
language by touching “SUB.T” or
AUDIO” during playback.
Changing the subtitle language during
playback (Multi-subtitle) Page 68
Changing audio language during playback
(Multi-audio) Page 68
Even if you use “SUB.T” or “AUDIO” to
switch the subtitle or audio language, this
does not affect the settings here.
Setting assist subtitles on or off
Assist subtitles offer explanations for the aurally
impaired. However, they are only displayed if they
are recorded on the DVD.
You can turn assist subtitles on or off as desired.
1 Touch “SET UP” and then touch “A SUB
TITLE”.
Touching “A SUB TITLE” switches between
ON” and “OFF”.
Setting angle icon display
You can set to display the angle icon on scenes
where the angle can be switched.
1 Touch “SET UP” and then touch “M.
ANGLE”.
Touching “M. ANGLE” switches between
ON” and “OFF”.
Setting the aspect ratio
There are two kinds of display. A wide screen
display has a width-to-height ratio (TV aspect) of
16:9, while a regular display has a TV aspect of
4:3. Be sure to select the correct TV aspect for the
display connected to REAR OUT.
When using a regular display, select either
LETTER BOX or PANSCAN. Selecting 16 : 9
may result in an unnatural picture.
If you select the TV aspect, navigation unit’s
display changes to the same setting.
1 Touch “SET UP” and then touch “TV
ASPECT”.
Each touch of the TV ASPECT changes the
settings as follows:
16 : 9 – Wide screen picture (16:9) is
displayed as it is (initial setting)
LETTER BOX – The picture is in the shape
of a letter box with black bands at the top
and bottom of the screen
PANSCAN – The picture is cut short at the
right and left of the screen
When playing discs that do not specify
PANSCAN, playback is with LETTER
BOX even if you select the PANSCAN
setting. Confirm whether the disc package
bears the mark. (See “Hardware
Manual”.)
Some discs do not enable changing of the
TV aspect. For details, refer to the disc’s
instructions.
Setting the parental lock
Some DVD-Video discs let you use parental lock
to restrict the viewing of violent and adult
oriented scenes by children. You can set the
parental lock level in steps as desired.
When you set a parental lock level and then
play a disc featuring parental lock, code
number input indications may be displayed. In
this case, playback will begin when the correct
code number is input.
Setting the code number and level
When you first use this function, register your
code number. If you do not register a code
number, parental lock will not operate.
1 Touch “SET UP” and “PARENTAL” and
then touch “PARENTAL”.
2 Touch 0 – 9 to input a four digit code
number.
3 While the input number is displayed,
touch “ENTER”.
The code number is registered, and you can
now set the level.
Setting Up the DVD Player
MAN-CNDV-50MT-EN.book Page 93 Wednesday, May 4, 2005 1:49 PM
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer CNDV-50MT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer CNDV-50MT in the language / languages: English as an attachment in your email.

The manual is 9,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer CNDV-50MT

Pioneer CNDV-50MT User Manual - Dutch - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info