454962
93
Zoom out
Zoom in
Previous page
1/142
Next page
91
Chapter 8 Customising the Audio Source SettingAV
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Touch “LOUDNESS” in the AUDIO menu.
2 Touch “ON” to turn loudness on.
To turn loudness off, touch “OFF”.
3 Touch 4 or 6 to select a desired level.
Each time you touch 4 or 6 selects level in
the following order:
LOW (low) – MID (mid) – HIGH (high)
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
When the subwoofer output is on, you can
adjust the cut-off frequency and the output
level of the subwoofer.
1 Touch “SUB WOOFER” in the AUDIO
menu.
When PREOUT (the subwoofer controller
setting in INITIAL menu) is FULL, you
cannot select “SUB WOOFER”.
Rear speaker setting Page 95
2 Touch “ON” to turn subwoofer output on.
To turn subwoofer output off, touch “OFF”.
3 Touch “REVERSE” or “NORMAL” to
select the phase of subwoofer output.
4 Touch “+” or “–” to adjust the output
level of the subwoofer.
+6–6 is displayed as the level is increased
or decreased.
5 Touch 4 or 6 to select cut-off frequency.
Each time you touch 4 or 6 selects cut-off
frequencies in the following order:
50 – 80 – 125 (Hz)
Only frequencies lower than those in the
selected range are output from the subwoofer.
Using non fading output
When the non fading output setting is on, the
audio signal does not pass through navigation
unit’s low pass filter (for the subwoofer), but is
output through the RCA output.
1 Touch “NON FADING” in the AUDIO
menu.
Only when PREOUT (the subwoofer
controller setting in INITIAL menu) is FULL,
you can select “NON FADING”.
Rear speaker setting Page 95
2 Touch “ON” to turn non fading output on.
To turn non fading output off, touch “OFF”.
3 Touch “+” or “” to adjust the output
level of the non fading.
+6–6 is displayed as the level is increased
or decreased.
Using the high pass filter
When you do not want low sounds from the
subwoofer output frequency range to play from
the front or rear speakers, turn the HPF (high
pass filter) on. Only frequencies higher than
those in the selected range are output from the
front or rear speakers.
1 Touch “HPF” in the AUDIO menu.
2 Touch “ON” to turn high pass filter on.
To turn high pass filter off, touch “OFF”.
3 Touch 4 or 6 to select cut-off frequency.
Each time you touch 4 or 6 selects cut-off
frequencies in the following order:
50 – 80 – 125 (Hz)
When PREOUT (the subwoofer controller
setting in INITIAL menu) is SW, the HPF
function is effective for front speakers only.
Audio Adjustments
MAN-CNDV-50MT-EN.book Page 91 Wednesday, May 4, 2005 1:49 PM
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer CNDV-50MT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer CNDV-50MT in the language / languages: English as an attachment in your email.

The manual is 9,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer CNDV-50MT

Pioneer CNDV-50MT User Manual - Dutch - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info