Manual Pioneer BDP-X300 (page 44 of 64) (English)

699670

Zoom out

Zoom in

1/64

PIN Input

Connection settings are made by inputting the 8-digit

PIN code shown on the main display to the access point

to which you selected. Follow the instructions shown in

Connecting using PIN code configuration on the right.

When performing wireless settings set Initial Setup

Network Interface to Wireless.

1 Press HOME MENU.

The HOME MENU screen is displayed.

2Use 3/4/2/1 to select Initial Setup and press

ENTER.

The Initial Setup screen is displayed.

3 Select Initial Setup Network Wireless

Setting Next Screen and press ENTER.

A confirmation screen is displayed.

4Use 2/1 to select Yes, then press ENTER.

The Wireless Setting screen is displayed.

5Use 3/4 to select Auto, then press ENTER.

The WPS (Wi-Fi Protected Setup) screen is displayed.

6Use 3/4 to switch between [ PBC] or [ PIN]

screens.

If WPS button is at the access point, it is recommended

you select [ PBC].

When connecting using PBC go to step 7.

When connecting using PIN go to step 8.

7 When connecting using PBC (Push Button), on

the [ PBC] screen use 2/1 to select Next, then

press ENTER.

Then press the WPS button on the access point within

120 seconds.

8 When connecting using PIN confirm the PIN

Code on the [ PIN] screen. Use cursor 2/1 to

select Next, then press ENTER.

9 Enter into the access point the PIN Code that you

confirmed in step 8 above.

The PIN Code input method differs depending on the

LAN device used. For details, consult the operating

instructions accompanying your LAN device.

Wireless network

connection

Wireless network setup

For the wireless network connection, the player needs to

be set up for network communication. This adjustment

can be done from the Setup menu. Adjust the

NETWORK setting as follow. Setting up the access point

or the wireless router is required before connecting the

player to the network.

∫ Preparation

Before setting the wireless network, you need to:

– set the access point or wireless router.

– note the SSID and security code of the network.

Note

• This unit conforms to the IEEE802.11b/g/n Wi-Fi

standards.

• Only 2.4 GHz is supported for the IEEE802.11n

standards.

1 Select Initial Setup Network Interface

Wireless and press ENTER.

• When making the wireless setting for the first time,

Wireless Setting is displayed. Proceed to step 4.

• When already set to Wireless, proceed to step 2.

2 Select Initial Setup Network Wireless

Setting Next Screen and press ENTER.

3 Select Yes and press ENTER to continue.

The new connection settings reset the current network

settings.

4 Wireless Setting menu is displayed.

Use 3/4 to select Scan. Then select Next using the 2/

1 and press ENTER.

5 The player scans the all available access points

or wireless routers within range and display them as

a list. Use 3/4 to select an access point or wireless

router on the list, and then press ENTER.

• If you have security on your access point or wireless

router, verify that the WEP or WPA key that was

entered into the player matches the routerís

information exactly. You need to input the security

code as necessary.

BDP-X300_72-BDPX300-GBRB1_En.book 44 ページ２０１６年５月２４日　火曜日　午後１時１０分

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer BDP-X300 in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer BDP-X300

Pioneer BDP-X300 User Manual - German, Dutch, French, Italian, Spanish - 304 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer BDP-X300 Manual

Product: