Manual Pioneer BDP-X300 (page 43 of 64) (English)

699670

Zoom out

Zoom in

1/64

∫ Setting the IP address

1 Select and set Network IP Address Setting

Next Screen.

Use 3/4 to select, then press ENTER.

2 Set IP address.

Use 3/4/2/1 to set the IP address of the player or

DNS server, then press ENTER.

• Auto Set IP Address

On – The player’s IP address is obtained

automatically. Select this when using a broadband

router or broadband modem that has a DHCP

(Dynamic Host Configuration Protocol) server

function. This player’s IP address will automatically

be allocated from the DHCP server.

Off – The player’s IP address must be set manually.

Use the number buttons (0 to 9) to input the IP

address, subnet mask and default gateway.

Caution

• Some time is required for the IP address setting.

Note

• Once the IP address is set, select [Connection Test]

to check that the unit is properly connected.

• For information on the DHCP server function, refer to

the operating instructions for the network device.

• You may need to contact your Internet service

provider or network administrator when inputting the

IP address manually.

∫ Setting the proxy server

Only set the proxy server if so instructed by your Internet

service provider.

1 Select and set Network Proxy Server Next

Screen.

Use 3/4 to select, then press ENTER.

2 Select and set Use or Not use at Proxy Server.

Use 2/1 to change, then press 4.

• Use – Select this when using a proxy server.

• Not use – Select this when not using a proxy server.

If you have selected Use, proceed to step 3.

3 Select and set Server Select Method.

Use 2/1 to change, then press 4.

• IP Address – Input the IP address.

• Server Name – Input the server name.

4 Input IP Address or Server Name.

Use the number buttons (0 to 9) to input the number if

you select IP address in step 3. Use 2/1 to move the

cursor.

When Server Name is selected in step 3, use the number

buttons (0 to 9) to launch the software keyboard. Now

use 3/4/2/1 to select characters and items, then

press ENTER to input.

5 Input Port Number.

Press 4, then use the number buttons (0 to 9) to

input the number.

6 Press ENTER to set.

∫ Displaying the network settings

1 Select and set Network Information Next

Screen.

Use 3/4 to select, then press ENTER.

The MAC address, IP address, subnet mask, default

gateway and DNS server (primary and secondary)

settings are displayed.

When Auto Set IP Address is set to On, the values

obtained automatically are displayed.

Note

• “0.0.0.0” is displayed when each IP address has not

been set.

∫ Testing the network connection

1 Select and set Network Connection Test

Start.

Use 3/4 to select, then press ENTER.

“Network is OK.” is displayed once the test is completed.

If any other message is displayed, check the

connections and/or settings (pages 19 and page 43).

WPS setup (Wi-Fi

Protected Setup)

WPS connection setting

WPS is abbreviation of Wi-Fi Protected Setup. A

standard established by the Wi-Fi Alliance industry

group for a function allowing settings related to

interconnection of WPS compatible wireless LAN

devices and encryption to be made with simple

operations.

This unit supports push-button configuration and PIN

code configuration.

PBC (Push Button Configuration)

Connection settings are made automatically simply by

pressing the WPS buttons on the WPS compatible

wireless LAN device. This is the simplest way of making

the settings, and is possible when the WPS compatible

wireless LAN device is equipped with WPS button.

BDP-X300_72-BDPX300-GBRB1_En.book 43 ページ２０１６年５月２４日　火曜日　午後１時１０分

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer BDP-X300 in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer BDP-X300

Pioneer BDP-X300 User Manual - German, Dutch, French, Italian, Spanish - 304 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer BDP-X300 Manual

Product: