574229
39
Zoom out
Zoom in
Previous page
1/64
Next page
39
En
07
Changing the Video options
There are a number of additional picture settings you can
make using the Video Parameter menu.
Operating the Video
Parameter screen
1 Press VIDEO P. to display the Video Parameter
screen.
2Use / to select the setting you want to adjust,
then press ENTER.
3Use / to set as necessary, then press ENTER.
Closing the Video Parameter screen
Press VIDEO P. or RETURN.
Note
It is not possible to open the Video Parameter screen when any of the Home Menu (Source, Web Contents, Initial
Setup), Audio Parameter, Function Menu, Disc Menu, YouTube or Picasa is being displayed.
It is not possible to open the Video Parameter screen while 3D contents are being played back.
Video Parameter options do not affect Blu-ray 3D pictures.
The Video Parameter option is not effective when the HDMI Mode is set to Pure Audio.
In Options, the factory default settings are indicated in bold.
1 This is effective only on audio output from ANALOG AUDIO OUT terminals.
2• This can be set when Manual is selected for Audio Scaler.
• This function does not work when the sampling frequency is 32 kHz.
3 • This setting only affects 2-channel audio sources.
• This function does not work when the Auto Sound Retriever setting is On.
4 The sound may be interrupted while setting the delay.
5This is the Audio Sync setting which you can set only when Auto is selected. The set value is reflected after you stop or pause playing and
play again.
TOP MENU POPUP MENU
HOME MENU RETURN
TOP
AUDIO P. VIDEO P.
CONTINUED
POP
UP
SOURCE
ENTER
YouTube
Setting Options Explanation
Video Adjust PJ Digital Cinema Selections are made to suit the audio visual equipment in use and the material
to be viewed and heard.
Select either the PJ mode for viewing with a projector or the FPD mode for
viewing with a flat panel television set. Select Digital Cinema when viewing the
latest movies with CGIs and digital processing, Film Cinema when viewing
conventional analog movies on film, and Live when viewing concert video.
The Reference mode is a setting that inhibits video signal processing. This
mode is selected when viewing the source as it is.
PJ Film Cinema
PJ Live
FPD Digital Cinema
FPD Film Cinema
FPD Live
Reference
Memory 1 to 3 If you want to adjust the picture quality settings to your personal tastes, select
Memory 1 to Memory 3 (see Adjusting the video on page 40).
Progressive Motion
1
1• Progressive Motion is disabled when Pure Cinema is set to On.
• This setting have the effect only for pictures recorded in the interlaced scan format (480i/576i or 1080i signals).
–4 to +4 (Default 0) Adjusts the motion and still picture quality when video output is set to
progressive.
Pure Cinema
Auto This setting optimizes the operation of the progressive scanning circuit for
playing film materials. Normally set it to Auto. If the picture seems unnatural,
switch this to On or Off.
On
Off
Stream Smoother Off Use the image quality of the built-in circuit, make the image quality correction
reduce block noise and mosquito noise, and improved sharpness feeling. This
is effective for playing online or low bit rate video contents.
On
Film Grain
2
2 The Film Grain function is effective on all videos, including on the Home menu screen.
0 to +8 (Default 0) Adds small particles of noise to give the effect of a movie film. The greater the
number, the higher the granular quality.
07_setting_audio_para_video_para.fm 39 ページ 2014年11月18日 火曜日 午後3時54分
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer BDP-LX88 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer BDP-LX88 in the language / languages: English as an attachment in your email.

The manual is 6,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer BDP-LX88

Pioneer BDP-LX88 User Manual - German, Dutch, French, Italian, Spanish - 312 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info