574229
21
Zoom out
Zoom in
Previous page
1/64
Next page
21
En
02
Input device is
connected with the
ZERO SIGNAL terminal.
The Zero Signal is the reference (GND) for video and audio
signals. If you connect the ZERO SIGNAL terminal of the
equipment to the audio input terminal of another device
connected to this equipment, with a pin cord, the device
becomes compatible to the audio standard of this
equipment, and the signal integrity improves.
On the other hand, if you connect the video input terminal
of the device, it will become compatible to the video
standard of this equipment and the signal integrity will
improve.
Connecting components
to the USB port
About USB devices
The USB devices that can be connected to the player are
as shown below.
USB 2.0-compatible USB flash drive (capacity of 1 GB
or greater, 2 GB or greater recommended) or HDD
(capacity 2 TB or less)
File system: FAT16, FAT32 or NTFS
Note
Devices formatted with a file system other than the
above cannot be used.
USB devices may not be recognized if they contain
multiple partitions.
Some USB devices may not operate with this player.
Operation of USB devices is not guaranteed.
Connecting the USB device
Caution
Be sure to turn the player’s power off before
connecting or disconnecting USB devices.
When using an external hard disk as the external
storage device, be sure to turn on the hard disk’s
power before turning on the player’s power.
If the USB device is write-protected, be sure to disable
the write-protection.
When connecting the USB cable, hold onto the plug,
set the plug in the proper direction for the port and
insert it horizontally.
Placing excessive loads on the plug may result in
poor contact, making it impossible to write data on
the USB device.
When a USB device is connected and the player’s
power is turned on, do not unplug the power cord.
Note
Devices may not work if connected to the USB port via
a memory card reader or USB hub.
Use a USB cable with a length of 2 meters or less.
RS-232C
DIGITAL AUDIO OUT
LAN
(10/100)
USB
HDMI OUT
OPTICAL
MAINSUB
COAXIAL
ZERO SIGNAL
Audio or Video
cable
(commercially
available)
AV receiver or TV etc.
To audio or video
input terminals
USB flash drive
BDP-LX88’s front panel
Hard disk, etc.
USB cable
(commercially
available)
RS-232C
DIGITAL AUDIO OUT
LAN
(10/100)
USB
OUT
OPTICAL
MAIN
COAXIAL
ZERO SIGNAL
USB flash drive
BDP-LX88’s rear panel
Hard disk, etc.
USB cable
(commercially
available)
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 21 ページ 2014年9月9日 火曜日 午前10時14分
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer BDP-LX88 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer BDP-LX88 in the language / languages: English as an attachment in your email.

The manual is 6,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer BDP-LX88

Pioneer BDP-LX88 User Manual - German, Dutch, French, Italian, Spanish - 312 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info