625516
153
Zoom out
Zoom in
Previous page
1/204
Next page
5 Touch the frequency for which you
want to adjust the level.
6 Touch [a]or[b] to adjust the level of
the equalizer band.
Each time you touch [a]or[b], the level of
the equalizer band increases or decreases.
Using the auto-adjusted equalizer
You can set the auto-adjusted equalizer to suit
the vehicles acoustics. To use this function,
the vehicles acoustics must be measured in
advance.
= For details of the operations, refer to Adjust-
ing the equalizer curve automatically (Auto
EQ) on page 154.
p To manually adjust the equalizer curve, set
Auto EQ to Off.
1 Display the AV Sound Settings
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 150.
2 Touch [EQ Menu].
3 Touch the key next to Auto EQ to
turn the auto-adjusted equalizer on or off.
4 Select the equalizer curve.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
p Settings are based on the FM tuner volume
level, which remains unchanged.
p You cannot select [SLA] when the FM tuner
is selected as the AV source.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Display the AV Sound Settings
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 150.
3 Touch [SLA].
4 Touch [+] or [] to adjust the source vo-
lume.
+8dB to 8dB is displayed as the source
volume is increased or decreased.
The following AV sources are set to the same
source level adjustment volume automatically.
! AV1 and AV2
! CD, ROM, and DivX
! SD and USB
! Bluetooth Audio, Pandora (Bluetooth con-
nection) and Aha Radio (Bluetooth con-
nection)
! Pandora (HDMI connection) and Aha
Radio (HDMI connection) (for AVIC-
Z150BH and AVIC-X950BH)
! iPod, Pandora (iPhone) and Aha Radio
(iPhone)
Using the high pass filter
When you cut lower sounds from the subwoo-
fer output frequency, activate HPF (high pass
filter). Only frequencies higher than those in
the selected range are output from the front or
rear speakers.
1 Display the AV Sound Settings
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 150.
2 Touch [HPF].
3 Touch [On].
# If you touch [Off], the setting is turned off.
En
153
Chapter
27
Customizing preferences
Customizing preferences
153


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer AVIC-X850BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer AVIC-X850BT in the language / languages: English as an attachment in your email.

The manual is 10,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info