139904
41
Zoom out
Zoom in
Previous page
1/140
Next page
11Enjoying through External Equipment
English
41
En
Using i/o Link.A
This system incorporates three typical i/o Link.A functions for
smooth connections between Media Receiver and other
audiovisual equipment.
One Touch Play
While the Plasma Display System is in standby mode, it
automatically turns on and plays back images from the
audiovisual source (e.g. VCR, DVD).
WYSIWYR (What You See Is What You Record)
When the remote control unit of the connected VCR has the
WYSIWYR button, you can automatically start recording by
pressing the WYSIWYR button.
Preset Download
Automatically transfers channel preset information from the
tuner on the Plasma Display System to the one on the
connected audiovisual equipment (e.g. VCR) via the INPUT 2
or 3 terminal.
The i/o Link.A functions work only when the audiovisual
equipment is connected to the INPUT 2 or 3 terminal on
the Media Receiver with i/o Link.A via a fully wired 21-pin
SCART.
Either INPUT 2 or 3 is available for i/o Link.A, depending on
the switch on the rear of the Media Receiver.
Using this switch, select the input terminal to which
recording equipment such as a VCR has been connected.
Refer to operation manuals of each external equipment for
the details.
If a SCART cable has been connected to the INPUT 3
terminal with the i/o Link.A activated, input signals (other
than Component) are automatically identified and dis-
played. If the i/o Link.A has been deactivated, Video is
always selected for signals other than RGB because the
system cannot identify among RGB, Y/C (S-Video), and
CVBS (Video) signals; for example, receiving Y/C (S-Video)
signals results in monochrome display.
Media Receiver (rear view)
SCART cable
(commercially available)
SERVICE ONLY
i / o link.A
SELECT
INPUT
23
INPUT U
INPUT 1
INPUT 3
INP UT 2
YP
B
P
R
COMPONENT VI DEO
MONITO
R
OUTPUT
R-AUDIO-L
S-VIDEO
VIDEO
i / o link.A
SELECT
INPUT
23
or
SERVICE ONLY
i / o link.A
SELECT
INPUT
23
INPUT U
INPUT 1
INPUT 3
INPUT 2
YP
B
P
R
COMPONENT VI DE O
MONITOR
OUTPUT
R-AUDIO-L
S-VIDEO
VIDEO
INPUT 3
HDMI
INPUT 3
Watching a DVD image
Connecting a DVD player
Use the INPUT 2 terminal when connecting to a DVD player
and other audiovisual equipment.
DVD player
Media Receiver (rear view)
SCART cable
(commercially available)
When using component
cable, select COMPO-
NENT for Input Select in
the menu. See page 35.
At the same time connect a
SCART cable to input audio
signals.
Displaying a DVD image
To watch a DVD image, press INPUT 2 on the remote control
unit or press INPUT on the Plasma Display to select INPUT2.
If DVD images do not come in clearly, you may need to
change the input signal type setting using the menu. See
page 35.
Refer to your DVD player operation manual for the signal
type.
Component cable
(commercially
available)
VCR or DVD Recorder
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer 435 fde at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer 435 fde in the language / languages: English, German, French as an attachment in your email.

The manual is 7,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer 435 fde

Pioneer 435 fde User Manual - Dutch, Italian, Spanish - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info